Dimensional standards
Height & bulk
Servicing
- Geographic extent
- Citywide
Extracted standards
27 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Canopy sign area3 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Maximum sign area: three square feet.
- Decorative flag area15 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Wall-mounted decorative flags, each shall not exceed 15 square feet in area.
- Freestanding sign base heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.3 ft
Freestanding signs shall be mounted on bases a maximum of three feet high.
- Freestanding sign max heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.12 ft
No freestanding sign shall exceed 12 feet in height from grade.
- Freestanding sign spacing50 ft
No freestanding sign shall be located within 50 feet of another freestanding sign
- Gas pump fuel price sign area1 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
One fuel price or promotional information sign mounted/incorporated into each fuel pump not to exceed one square foot
- Gas pump self-serve sign area2.5 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Two "self serve" or "full serve" signs per pump island not to exceed two and one-half square feet each
- General max sign area per building face30 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
no sign attached to a building face shall exceed 30 square feet in area
- General sign area ratio1 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000./ft
computed on the ratio of one square foot of sign for each lineal foot of building face not to exceed 75 feet
- External illumination only
Only external illumination of signs is permitted
- Marquee sign clearance8 ft
The bottoms of marquee signs shall be not less than eight feet above the sidewalk or grade at any point.
- Max exposed incandescent bulb wattage15 watts
No exposed reflective bulb, strobe light, or incandescent lamp that exceeds 15 watts shall be used on the exterior surface of any sign
- Sign area without building9 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
In the absence of a building, the total sign area shall not exceed nine square feet per side.
- Projecting sign bracket spacing15 ft
Have no more than one bracket for every full 15 feet of building frontage
- Projecting sign curb clearance1 ft
Extend no closer than one foot to the curb line
- Projecting sign max area (large frontageFrontageThe length of a lot line that touches a public street.)15 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
maximum of 15 square feet per sign face for building faces with 30 or more lineal feet of frontage
- Projecting sign max area (small frontageFrontageThe length of a lot line that touches a public street.)9 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
maximum size per side of nine square feet for building faces with fewer than 30 lineal feet of frontage
- Projecting sign max heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. above sidewalk20 ft
Not have the bracket or any portion of a projecting sign placed more than 20 feet above the front sidewalk
- Projecting sign sidewalk clearance8 ft
Have a minimum clearance of eight feet above a public sidewalk
- Sandwich board max heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.4 ft
Such sign shall be no larger overall than four feet in height and two feet in width
- Sandwich board max width2 ft
Such sign shall be no larger overall than four feet in height and two feet in width
- Sandwich board min sidewalk width36 in
shall not restrict the width of the public pedestrian right-of-way to less than 36 inches
- Shopping center sign area20 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Sign area shall not exceed 20 square feet.
- Shopping center sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.12 ft
Sign height shall not exceed 12 feet
- Signs per building face2 count
Two signs shall be allowed per building face, with not more than one projecting, freestanding, or marquee sign allowed per face.
- State inspection sign area6 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The maximum sign area shall be six square feet.
- Window sign area percentage20 pct
The total area of window signs, including those advertising sales, in any one window shall not exceed 20 percent of the area of the window.
From the ordinance
The total sign area for the face of any building, however allocated among sign types (flat wall, projecting, freestanding, awning, window, and/or marquee), shall be computed on the ratio of one square foot of sign for each lineal foot of building face not to exceed 75 feet, except that no sign attached to a building face shall exceed 30 square feet in area.