Lynchburg, Virginia · General provision

Sec. 35.2-72.13

Dimensional standards

lot requirementsSTREETSTREETFront 30 ftRear 25 ftSide 25 ftStreet side 30 ftMin frontage 40 ftMIN LOT AREA10 acMAX LOT COVERAGE30%MAX DENSITY8 du/ac
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Extracted standards

7 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Frontage

Other

From the ordinance

The site shall contain no less than ten contiguous acres. ... Maximum density shall be that prescribed for the district in which the park is located, except that no manufactured home park shall exceed a density of eight units per acre. No individual lot shall be less than 4,000 square feet for single-wide units and 6,000 square feet for double-wide units. ... All manufactured homes shall be located at least 25 feet from any lot line and 30 feet from any street right-of-way. ... Lot coverage may not exceed 30 percent.
Sec. 35.2-72.13

Parking requirements

{
  "manufactured_home": "2 spaces per unit"
}