Section 10-6-1, 10-6-3, 10-6-5
Dimensional standards
Extracted standards
13 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Deadline to submit final plat after preliminary approval1 years
Submits a Final Plat for all or a portion of the property within one year of such approval
- Maximum preliminary plat scale100 ft/in
at a scale of not more than 100 ft. to the inch
- Minimum lots requiring preliminary plat51 lots
All proposed subdivisions involving more than 50 lots must submit a Preliminary Plat
- Maximum preliminary plat sheet heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.42 in
or a maximum of 30" x 42" in size
- Maximum preliminary plat sheet width30 in
or a maximum of 30" x 42" in size
- Minimum preliminary plat sheet heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.36 in
sheets a minimum of 24" x 36" in size
- Minimum preliminary plat sheet width24 in
sheets a minimum of 24" x 36" in size
- Preliminary plat validity period5 years
an approved Preliminary Plat shall be valid for a period of five (5) years
- Notice period for preliminary plat revocation90 days
the Agent shall provide the subdivider with 90 days written notice
- Days for agent to approve technical change10 days
The Agent shall either approve or disapprove the change within 10 days of the request.
- Maximum topographic contour interval10 ft
A topographic map with a contour interval of not greater than 10 ft.
- Vicinity map radius0.5 miles
including the area within 1/2 mile
- Vicinity map scale2,000 ft/in
A vicinity or location map to a scale of 1" = 2,000'
From the ordinance
All proposed subdivisions involving more than 50 lots must submit a Preliminary Plat for approval. ... All Preliminary Plats shall be blueline or blackline prints on sheets a minimum of 24" x 36" in size, or a maximum of 30" x 42" in size, and at a scale of not more than 100 ft. to the inch. ... A vicinity or location map to a scale of 1" = 2,000' showing the location of the proposed subdivision with respect to adjoining property, including the area within 1/2 mile. ... A topographic map with a contour interval of not greater than 10 ft. ... an approved Preliminary Plat shall be valid for a period of five (5) years ... Submits a Final Plat for all or a portion of the property within one year of such approval ... if approval of the Final Plat is not diligently pursued after a period of three (3) years, the Agent shall provide the subdivider with 90 days written notice ... The Agent shall either approve or disapprove the change within 10 days of the request.