Section 7-3-11
Dimensional standards
Lot
Density
- Maximum density
- 5 du/acredu/acreDwelling units per acre — the number of homes allowed on each acre of land.
- Maximum units
- 50
Extracted standards
10 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Additional open spaceOpen spaceLand a development must leave unbuilt, sometimes required to be usable or planted. per unit over 20200 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
An additional 200 sq. ft. of open space shall be provided for each unit over 20 units.
- Minimum frontageFrontageThe length of a lot line that touches a public street. on internal street75 ft
Each lot in a manufactured home park shall have a minimum frontage of 75 ft. on an internal street which is connected to a public road.
- Minimum frontageFrontageThe length of a lot line that touches a public street. on public road200 ft
Manufactured home parks shall have minimum frontage of 200 ft. on a public road.
- Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built. per manufactured homeManufactured homeA dwelling built in a factory to a federal standard and transported to the site. lot7,500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Minimum of 7,500 sq. ft. for each lot within the manufactured home park.
- Minimum recreation area4,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Each manufactured home park shall provide not less than 1 recreation area or playground, and no such area shall be less than 4000 sq. ft. in area.
- Screening fence or buffer heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.7 ft
Every manufactured home park shall be enclosed with an approved fence or landscaped buffer not less than 7 ft. in height
- SetbackSetbackThe distance a building must be held back from a lot line. from internal streets20 ft
All manufactured homes shall be set back a minimum of 20 ft. from all internal streets.
- SetbackSetbackThe distance a building must be held back from a lot line. from property line in districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. where not permitted100 ft
No manufactured home shall be located closer than 100 ft. to any property line in a zoning district where manufactured home parks are not permitted.
- SetbackSetbackThe distance a building must be held back from a lot line. from adjacent property lines in same districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.50 ft
Setbacks of manufactured homes from adjacent property lines in the same zoning district or in zoning districts which permit manufactured home parks shall be a minimum of 50 ft.
- Side and rear setbacksSetbackThe distance a building must be held back from a lot line.30 ft
All manufactured homes shall have side and rear setbacks of 30 ft.
From the ordinance
Minimum of 5 contiguous acres for a manufactured home park. Minimum of 7,500 sq. ft. for each lot. Maximum number of manufactured home units shall be 5 units per acre. Maximum of 50 manufactured homes per park. Minimum frontage of 200 ft. on a public road. Each lot minimum frontage of 75 ft. on an internal street. Screening fence or landscaped buffer not less than 7 ft. in height. Setbacks: 100 ft. from property line in other districts, 50 ft. from adjacent property lines in same district, 20 ft. from internal streets, side and rear 30 ft. Open space: not less than 1 recreation area 4000 sq. ft., additional 200 sq. ft. per unit over 20.