Subdivision Regulations, As-Built Plans

Other

• As-built info style

  All as-built information shall be shown on the original plan either as blocked in or drawn in a different text style or font from that as shown on the original plan.

• AS-BUILT label

  Each sheet of the plan shall contain the words 'AS-BUILT' in bold text on or near the title block.

• Certification

  The final as-built plan must be stamped by Licensed Land Surveyor or Professional Engineer and include certification that the as-built plan is substantially in conformance with the original plan. If a geotechnical report is used, the appropriate licensed professional must certify that the as-built is in conformance with the report.

• Curb cutGrading (cut & fill)Reshaping land by removing earth (cut) or adding it (fill), often capped by volume. and driveway

  Curb cut, driveway and material. Centerline grade of driveway with spot elevations.

• Drainage and utilities

  Horizontal and vertical location of roof drains, foundation drains and other drainage outlets. Locations of utility services.

• Horizontal variation >1 ft1 ft

  Horizontal variations greater than one (1.0) foot should be shown dimensionally or through plus stations.

• Horizontal variation >5 ft5 ft

  Horizontal variations greater than five (5.0) feet should also show the graphic relocation of the object.

• Date, legend, scale, north arrow

  Date, plan legend, bar scale and north arrow.

• Required plantings

  Location of required plantings.

• Retaining walls

  Retaining walls. Indicate type and show elevations of the top of wall and the lowest adjacent finished grade.

• Spot elevations1 pct

  Spot elevations of graded areas to determine grade of finished slope. Highlight all areas of finished slopes exceeding design grade by more than one percent (1%).

• Structure locations

  Horizontal location with dimensions of all structures with dimensions including porches, decks, garages, etc. Show vertical elevations of first floor and basement floor.

• Vertical elevation variation >0.1 ft0.1 ft

  Vertical elevation variations greater than 0.1 feet shall be provided for all shown design elevations.