zoneoptics
Claremont, Virginia · General provision

Sec. 3-1004

HeavyAll Claremont districts0

Dimensional standards

lot requirementsSTREETMin width 150 ftMin depth 200 ftMIN LOT AREA40,000 sq ftMIN FRONTAGE150 ftMAX HEIGHT75 ft
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Lot

Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built.
40,000 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. (0.92 acacre43,560 square feet — about the size of an American football field without the end zones.)
Minimum lot widthLot widthHow wide a lot must be, usually measured at the front setback line.
150 ft
Minimum frontageFrontageThe length of a lot line that touches a public street.
150 ft
Minimum lot depth
200 ft

Height & bulk

Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.
75 ft

Housing

Single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours.
prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
Two-family
prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
Three-family
prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
Four-plus family
prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.

Uses

Permitted by right34

Conditional / special use13

Accessory1

From the ordinance

All structures: 75 feet.
Sec. 3-1004