Dimensional standards
Servicing
- Applies near
- Floodway DistrictZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. (AE Zone)
- Geographic extent
- Floodway districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. in an AE Zone, delineated using the criterion that certain areas within the floodplainFloodplainLand expected to flood at a stated frequency, where building carries extra conditions. must be capable of carrying the waters of the one percent annual chance flood without increasing the water surface elevation of that flood more than one foot at any point.
Extracted standards
2 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Floodplain
- Encroachment analysis required
Within any floodway area, no encroachments, including fill, new construction, substantial improvements, or other development shall be permitted unless it has been demonstrated through hydrologic and hydraulic analysis performed in accordance with standard engineering practice that the proposed encroachment will not result in any increase in flood levels within the community during the occurrence of the base flood discharge.
- Manufactured homesManufactured homeA dwelling built in a factory to a federal standard and transported to the site. prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
The placement of manufactured homes (mobile homes) is prohibited, except in an existing manufactured home (mobile home) park or subdivision.
From the ordinance
Within any floodway area, no encroachments, including fill, new construction, substantial improvements, or other development shall be permitted unless it has been demonstrated through hydrologic and hydraulic analysis performed in accordance with standard engineering practice that the proposed encroachment will not result in any increase in flood levels within the community during the occurrence of the base flood discharge.