Dimensional standards
Lot
Uses
Permitted by right6
- All residential, civic, office, commercial use types from Article II
- Industry, light
- Industry, medium
- Research and Development
- Laboratory
- Custom Manufacturing
Conditional / special use1
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
Planned Industrial Zoning constitutes conditional zoning. Proposals in preliminary development plan constitute proffers.
- Lot coverageLot coverageThe share of a lot that buildings may cover, as a percentage. via preliminary development plan
Maximum lot coverage shall be determined through the preliminary development plan process.
- Minimum districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. size10 acresacre43,560 square feet — about the size of an American football field without the end zones.
Minimum district size: Ten (10) acres
- Residential use limit15 pct
Residential Use Types shall be limited to no more than fifteen (15) percent of the district area.
- SetbacksSetbackThe distance a building must be held back from a lot line. via master planComprehensive planThe long-range policy document zoning is meant to implement; it is not itself binding law.
Yards for lots internal to the site will be established through the preliminary master plan. For lots abutting collector road, min setback 10 ft.
- Utility lines underground
All utility lines, electric, telephone, cable television lines, etc., shall be placed under ground.
From the ordinance
Minimum district size: 10 acres. Minimum frontage: 75 ft. Minimum lot size: 2 acres. Minimum open space: 20%. Maximum height: 60 ft. Utility lines underground.