Dimensional standards
Servicing
- Geographic extent
- Citywide
Extracted standards
1 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Gross area for FARFloor area ratio (FAR)Total floor area divided by lot area — an FAR of 2.0 permits 20,000 sq ft of floor on a 10,000 sq ft lot./density calculation
In every zone, the maximum floor area ratio and maximum density specified for the zone shall be determined on the basis of the gross area of the lot or tract of land involved, which shall include: Areas to be dedicated for street purposes that are in excess of 30 feet from the centerline in the instance of property located in the R-20 through R-2-5 zones, inclusive. 33 feet from the centerline in the instance of property located in each of the other zones. Areas located within fire, emergency vehicle, buffer, scenic, channel, bicycle, utility, park or sewer easements.
From the ordinance
In every zone, the maximum floor area ratio and maximum density specified for the zone shall be determined on the basis of the gross area of the lot or tract of land involved, which shall include: Areas to be dedicated for street purposes that are in excess of 30 feet from the centerline in the instance of property located in the R-20 through R-2-5 zones, inclusive. 33 feet from the centerline in the instance of property located in each of the other zones. Areas located within fire, emergency vehicle, buffer, scenic, channel, bicycle, utility, park or sewer easements.