Dimensional standards
Lot
Density
Height & bulk
Housing
- Two-family
- by_right
- Three-family
- by_right
- Four-plus family
- by_right
Uses
Permitted by right9
Conditional / special use7
- day care center within a church or school building
- child or elder care home (other than permitted)
- cemetery
- noncommercial not-for-profit facilities
- private school
- church or school parking added after 1996 exceeding required spaces
- continuum of care facility
Prohibited1
Extracted standards
2 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Maximum FARFloor area ratio (FAR)Total floor area divided by lot area — an FAR of 2.0 permits 20,000 sq ft of floor on a 10,000 sq ft lot. for continuum of care facility0.75 ratio
The maximum permitted floor area ratio is .75 and a maximum of 50 percent of the floor space of the proposed development may be residential use.
- Maximum threshold heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. for residential use2.5 ft
The maximum permitted threshold height for a residential use is two and one-half feet, the highest threshold height within the contextual block face or the minimum necessary to comply with the floodplain requirements of section 6-306(B), whichever is greatest.
From the ordinance
The RMF-1 zone is established to provide and maintain land areas for residential neighborhoods of single-unit, two-unit, and multi-unit dwellings at a density not to exceed 10 dwelling units per acre.