Dimensional standards
Lot
Density
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Density
- Campground maximum density of campsites12 units/acreacre43,560 square feet — about the size of an American football field without the end zones.
Maximum density of campsites = 12 units per acre.
Other
- Campground accessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. structure setbackSetbackThe distance a building must be held back from a lot line. from boundary100 ft
Accessory structures or recreation facilities, offices, service buildings, boat ramps, marinas, washrooms, swimming pools, game courts, ball fields and the like should generally be oriented and accessed internally and located to minimize impact on adjacent property, in no case closer than 100 feet to any campground boundary or closer than 200 feet to any lot in an R-1 or R-2 Residence District.
- Campground internal drive width10 ft
Internal access drives shall be of adequate width for internal traffic, hard surfaced and maintained at least ten feet in width, in accord with applicable county specifications.
- Campground maximum stay30 days
No campground guests shall stay more than 30 consecutive nights in any one visit.
- Campground minimum campsite area3,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Minimum campsite area = 3,000 square feet.
From the ordinance
Minimum lot size = Five acres.