Sec. 4-700, 4-702, 4-708, 4-802, 4-803
Dimensional standards
Uses
Permitted by right3
Conditional / special use2
Extracted standards
17 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Noise
- BESS noise at occupied structure55 dBA
shall not exceed 55 dBA at the outer wall of any occupied structure on an adjacent parcel in the AR district in existence at the time the project receives its conditional use permit.
Other
- Antique shop buffer when adjoining residential
When adjoining a residential use type, a Type B buffer yard in accordance with section 5-400 shall be provided along the property line which adjoins the residential use type.
- Antique shop maximum floor area3,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Antique shops shall not exceed 3,000 square feet in gross floor area unless a special use permit is obtained from the board of zoning appeals.
- BESS setbackSetbackThe distance a building must be held back from a lot line. from property lines200 ft
Be located at least 200 feet from all property lines, unless the adjacent parcel is zoned industrial, has an electric substation to which the battery energy storage system will connect and is located on the same side of the road, or is an adjacent parcel owned or leased by the battery energy storage system's owner or operator.
- BESS setbackSetbackThe distance a building must be held back from a lot line. from residential/commercial structures500 ft
Be located 500 feet from all residential and commercial structures.
- BESS vegetative buffer100 ft
Battery energy storage systems located in the A-R district shall be fully screened on all sides from ground-level view by a vegetative buffer of at least 100 feet located within the required setbacks...
- Contractor's yardYardThe open space left between a building and its lot line — the space a setback creates. standards
In considering a special use permit request for a construction yard, the board of zoning appeals may consider and set standards for screening, height, dust, noise, hours of operation, and maintenance within an enclosed building.
- Custom manufacturing accessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. to single-family dwellingSingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours.
The custom manufacturing establishment shall be accessory to a single-family dwelling.
- Custom manufacturing buffer when adjoining residential within 100 ft
When an adjoining residential use type on an adjoining lot is within 100 feet of the property, a Type B buffer yard in accordance with section 5-400 shall be provided along the property line which adjoins the residential use type.
- Custom manufacturing direct access to public street
The site shall front directly on and have direct access to a publicly owned and maintained street.
- Custom manufacturing maximum floor area3,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Maximum square footage for a custom manufacturing establishment: 3,000 square feet.
- Custom manufacturing minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built.130,680 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
No custom manufacturing establishment shall be located on lot containing less than three acres.
- KennelKennelBoarding or breeding animals above the number kept as household pets. buffer when adjoining residential
When adjoining a residential use type, a Type B buffer yard in accordance with section 5-400 shall be provided along the property line which adjoins the residential use type.
- KennelKennelBoarding or breeding animals above the number kept as household pets. direct access to public street
The site shall front on and have direct access to a publicly owned and maintained street.
- KennelKennelBoarding or breeding animals above the number kept as household pets. facility setbackSetbackThe distance a building must be held back from a lot line. from property line100 ft
All facilities associated directly with the commercial kennel, whether indoors or outdoors, shall be set back a minimum of 100 feet from any property line.
- KennelKennelBoarding or breeding animals above the number kept as household pets. minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built.217,800 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The minimum area required for a commercial kennel shall be five acres.
- KennelKennelBoarding or breeding animals above the number kept as household pets. outdoor run setbackSetbackThe distance a building must be held back from a lot line. from property line200 ft
All outdoor runs, training areas and pens associated with a commercial kennel shall be set back a minimum of 200 feet from any property line.
From the ordinance
In the A-R District: Be located at least 200 feet from all property lines...