Dimensional standards
Lot
- Minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built.
- 43,560 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. (1 acacre43,560 square feet — about the size of an American football field without the end zones.)
- Minimum lot depth
- 150 ft
Density
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Maximum units per building12 units
No multiple-family dwelling shall contain more than 12 dwelling units in any one building.
- Minimum distance between multifamilyMultifamily dwellingA building of four or more dwelling units. Where zoning is most restrictive. structures50 ft
The minimum distance between multifamily structures shall be 50 feet.
- Open spaceOpen spaceLand a development must leave unbuilt, sometimes required to be usable or planted. per unit500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
At least 500 square feet of commonly usable open space shall be provided for each apartment dwelling unit.
- SetbackSetbackThe distance a building must be held back from a lot line. from single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. districts50 ft
Building setbacks for lots adjacent to single-family residential districts or property used for single-family dwellings shall be at least 50 feet.
From the ordinance
Minimum tract size: One acre. Minimum lot width and frontage of 100 feet. Minimum lot depth of 150 feet. Overall project density shall not exceed ten dwelling units per acre.