Dimensional standards
Density
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Contiguous units
no less than three and no more than six units contiguous to one another
- Face-to-face setbackSetbackThe distance a building must be held back from a lot line.60 ft
The setback shall be increased to 60 feet if the townhouse structures are face to face.
- Minimum distance between structures40 ft
The minimum distance between any two unattached townhouse structures shall be 40 feet.
- Minimum units10 dwelling unitsDwelling unitOne independent home: its own kitchen, bathroom and entrance.
The development or project shall consist of at least ten dwelling units
From the ordinance
For townhouses for sale and similar attached development types, the development or project shall consist of at least ten dwelling units with no less than three and no more than six units contiguous to one another. Public water and public sewer service shall be provided. Overall project density shall not exceed six dwelling units per acre including public or commonly used rights-of-way constructed to serve the project. Each townhouse shall be erected or placed on a specifically designated land area or on a lot containing not less than 2,500 square feet. The remaining area required to meet minimum project density shall be incorporated into usable and accessible common open space or spaces and/or private vehicular access or parking areas. The minimum distance between any two unattached townhouse structures shall be 40 feet. The setback shall be increased to 60 feet if the townhouse structures are face to face. The point of measurement shall be the exterior walls of the structures and does not include balconies or other architectural features.