Dimensional standards
Density
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Density
- Maximum residential density in PCD30 du/acredu/acreDwelling units per acre — the number of homes allowed on each acre of land.
For residential uses within a planned commercial development, the dwelling unit density shall not exceed 30 dwelling units per gross acre.
Other
- Conditional useConditional useAllowed only after a discretionary approval — usually a public hearing and a board vote. permit required
No development shall be commenced until a master plan and conditional use permit have been approved by the town council.
- Minimum total development area10 acresacre43,560 square feet — about the size of an American football field without the end zones.
The total development area, whether existing as a single parcel or multiple adjacent parcels is at least ten acres.
Parking
- Maximum parking reduction20 pct
Required off-street parking may be decreased by no more than 20 percent.
From the ordinance
Planned Commercial Developments (PCDs) are intended to provide for flexibility... The maximum ratio of residential development square footage to the square footage of the overall development shall be provided as a condition of development... For residential uses within a planned commercial development, the dwelling unit density shall not exceed 30 dwelling units per gross acre. Required off-street parking may be decreased by no more than 20 percent... The total development area, whether existing as a single parcel or multiple adjacent parcels is at least ten acres...