Dimensional standards
Extracted standards
9 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Business building setbackSetbackThe distance a building must be held back from a lot line. from residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.20 ft
No business or commercial building or structure, temporary or permanent, shall be located closer than 20 feet to the boundary of a residential district or located within any easement or right-of-way.
- Maximum grass in greenspace50 pct
with no more than 50 percent of the greenspace in grass alone.
- Minimum greenspace20 pct
A minimum of 20 percent of the site shall be reserved for greenspace landscaping with no more than 50 percent of the greenspace in grass alone.
- Minimum tree heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. at planting6 ft
The greenspace shall contain trees with a minimum height, at time of planting, of six feet or more at the ratio of one tree per 400 square feet or less of greenspace area.
- Multi-use trail minimum width10 ft
In lieu of sidewalks, an owner or developer may provide a paved multi-use trail if approved by the town manager. The trail must be a minimum of ten feet in width and adjoin the street right-of-way.
- Residential development compliance
Residential development shall comply with all frontage, lot, yards and development standards for similar development in the R-3 Multiple-Family Residential District, unless such residence is part of the business building or structure.
- Sidewalk requirement
Sidewalks shall be required for all new development.
- Sidewalk requirement for renovation
Sidewalks shall be required whenever a new principal building is built or an existing principal building is renovated or expanded sufficiently to increase its value by 25 percent before a certificate of occupancy may be issued.
- Tree ratio400 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. per tree
one tree per 400 square feet or less of greenspace area.
From the ordinance
Whenever any development containing common area is proposed... No business or commercial building or structure, temporary or permanent, shall be located closer than 20 feet to the boundary of a residential district... A minimum of 20 percent of the site shall be reserved for greenspace landscaping... Sidewalks shall be required for all new development.