Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum identification signs per business2 count
No business shall have more than two identification signs without approval of the zoning administrator.
- Maximum sign area within 100 ft of residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.25 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Any sign erected within 100 feet of any residential zoning district shall be nonilluminated and limited to 25 square feet in area.
- Signs within 100 ft of residential must be nonilluminated
Any sign erected within 100 feet of any residential zoning district shall be nonilluminated and limited to 25 square feet in area.
- Ground-mounted sign minimum setbackSetbackThe distance a building must be held back from a lot line. in business/industrial districts5 ft
Minimum setback of ground-mounted signs shall be five feet from any public right-of-way, service drive, or entrance.
From the ordinance
Any sign erected within 100 feet of any residential zoning district shall be nonilluminated and limited to 25 square feet in area. Minimum setback of ground-mounted signs shall be five feet from any public right-of-way, service drive, or entrance. No business shall have more than two identification signs without approval of the zoning administrator.