Dimensional standards
Lot
Height & bulk
Housing
- Two-family
- by_right
Servicing
- Geographic extent
- Sites of 2 or more contiguous developable acresacre43,560 square feet — about the size of an American football field without the end zones. held in common ownership within R-4
Uses
Permitted by right9
- Single-family, detached
- Townhouse (only on lots served by alley access)
- Two-family dwelling (only on lots served by alley access)
- Home occupations
- Community recreation
- Open space
- Public parks and recreation
- Utility services, minor
- Accessory structures
Accessory1
Extracted standards
19 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Design
- Maximum attached townhouseTownhouseA single-family home sharing side walls with its neighbours, each on its own lot. units per structure6 units
The maximum number of attached townhouse units in a single structure shall be six.
- Minimum separation between townhouseTownhouseA single-family home sharing side walls with its neighbours, each on its own lot. building end walls15 ft
Where a development consists of multiple townhouse structures, there shall be a minimum separation of 15 feet between building end walls.
- Minimum transparencyGround-floor transparencyThe share of a ground-floor street wall that must be windows rather than blank surface. on street-facing facades10 pct
A minimum transparency of 10% is required on all street-facing facades.
Height
- Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. on corner lots with negative slope35 ft
35 ft. and 2.5 stories on corner lots with a negative slope of 10% or greater from the front lot line to the rear lot line
Other
- Maximum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built.7,499 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
No lot within a small lot development shall be larger than 7,499 square feet.
- Maximum lot coverageLot coverageThe share of a lot that buildings may cover, as a percentage. for 5,000-7,499 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots60 pct
Lots 5,000 sf to 7,499 sf in area: 60%
- Maximum lot coverageLot coverageThe share of a lot that buildings may cover, as a percentage. for 3,000-4,999 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots65 pct
Lots 3,000 sf to 4,999 sf in area: 65%
- Maximum principal structure footprint for 5,000-7,499 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots1,500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
25% of the lot, not to exceed 1,500 sf
- Maximum principal structure footprint for 3,000-4,999 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots1,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
25% of the lot, not to exceed 1,000 sf
- Maximum unrelated occupants2 persons
The maximum dwelling unit occupancy within a small lot development shall be a family plus one (1) person unrelated to the family; or no more than two (2) unrelated individuals.
- Minimum lot frontageFrontageThe length of a lot line that touches a public street. for 5,000-7,499 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots40 ft
Lots 5,000 sf to 7,499 sf in area: 40 ft.
- Minimum lot frontageFrontageThe length of a lot line that touches a public street. for 3,000-4,999 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots30 ft
Lots 3,000 sf to 4,999 sf in area: 30 ft.
A minimum of 10% of the development site for a small lot development shall be reserved as open space for public use.
- Minimum open spaceOpen spaceLand a development must leave unbuilt, sometimes required to be usable or planted. with >10 two-family/townhouseTownhouseA single-family home sharing side walls with its neighbours, each on its own lot. units15 pct
In the case of a small lot development that includes more than 10 two family or townhouse units, calculated cumulatively, a minimum of 15% of the development site shall be reserved as open space for public use.
Parking
- Off-street parkingMinimum parkingThe number of off-street spaces a development must provide before it may open. required0 spaces
No off-street vehicular parking shall be required for a small lot development.
Setback
- Corner side setbackSetbackThe distance a building must be held back from a lot line. for 5,000-7,499 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots10 ft
Lots 5,000 sf to 7,499 sf in area: 10 ft., subject to required sight distance
- Corner side setbackSetbackThe distance a building must be held back from a lot line. for 3,000-4,999 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots5 ft
Lots 3,000 sf to 4,999 sf in area: 5 ft., subject to required sight distance
- Interior side setbackSetbackThe distance a building must be held back from a lot line. for 5,000-7,499 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots5 ft
Lots 5,000 sf to 7,499 sf in area: 5 ft.
- Interior side setbackSetbackThe distance a building must be held back from a lot line. for 3,000-4,999 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. lots3 ft
Lots 3,000 sf to 4,999 sf in area: 3 ft.
From the ordinance
Small Lot Development in the R-4 District shall require a minimum lot area of 3,000 square feet. No lot within a small lot development shall be larger than 7,499 square feet. Front setback 10 ft. Max height 30 ft and 2.5 stories. Lot coverage 60-65%.