Riverside, California · General provision

19.630.030.B.3, 19.630.030.D, 19.630.040, 19.630.050

Dimensional standards

lot requirementsSTREETbuildable areaRear 10 ft
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Extracted standards

10 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

Parking

From the ordinance

Through lots. The front yard setback on the street side of a through lot is a line parallel to the property line abutting both streets. In other words, a through lot has two front yards. ... The rear setback building line is a line parallel to the rear property line, at a minimum distance specified by the base zone measured at right angles from the rear property line, that extends between the side yards, except as follows: ... Cornices, eaves, belt courses, sills bay windows, buttresses, or other similar architectural features may project up to four feet into a required front yard area and may project into a required side or rear yard area up to four inches per one foot of width of such yard. ... No more than 1,000 square feet of the rear yard shall be paved, or 25 percent of the rear yard area, whichever is less, for parking purposes.
19.630.030.B.3, 19.630.030.D, 19.630.040, 19.630.050