Extracted standards
8 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum construction site sign area32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Such signs shall not exceed 32 square feet in area
- Maximum directional sign area6 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
monument directional signs, not exceeding six square feet in area per display face
- Maximum flag area for residential uses25 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
maximum area of 25 square feet
- Maximum hazard sign area1 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
individual signs do not exceed one square foot in size
- Maximum wattage for exposed incandescent lamps40 watts
Exposed incandescent lamps that exceed 40 watts ... are not permitted.
- Minimum distance from overhead electric conductors >750V6 ft
within six feet of overhead electric conductors, which are energized in excess of 750 volts
- Minimum distance from overhead electric conductors 0-750V3 ft
within three feet of conductors energized at zero to 750 volts
- Minimum clearance for under canopy signs7 ft
A minimum clearance of seven feet shall be maintained between the grade level below the sign and the lowermost portion of the sign
From the ordinance
In all zones, only such signs as are specifically permitted in this chapter may be placed, erected, maintained, displayed or used, and the placement, erection, maintenance, display or use of signs shall be subject to all restrictions, limitations and regulations contained in this chapter.