Dimensional standards
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Minimum bumper stop heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.2 ft
Bumper stops not less than two feet in height or wheel stops not less than six inches in height shall be erected adjacent to any building or structure, wall, fence, property line, or walkway to protect other property.
- Concrete curb heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. and width6 in
Areas containing plant materials shall be bordered by a concrete curb at least six inches high and six inches wide.
- Masonry wall heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. in front yardYardThe open space left between a building and its lot line — the space a setback creates.3 ft
provided that such wall shall be three feet high within the required front or street side yard area, or, where no front or street side yard area is required, such wall shall be three feet high within ten feet of the street line.
- Masonry wall heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. adjacent to residential6 ft
When adjoining or across an alley from any residentially zoned or residentially used lot, a masonry wall six feet in height shall be erected and maintained so as to physically separate the parking, loading or sales area from the residential property.
- Minimum wheel stop heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 in
Bumper stops not less than two feet in height or wheel stops not less than six inches in height shall be erected adjacent to any building or structure, wall, fence, property line, or walkway to protect other property.
From the ordinance
All driveways and parking areas shall be paved with asphalt, concrete, or other hard surface material in accordance with the established standards and specifications of the Public Works Department.