Riverside, California · General provision

19.130.025, 19.130.040

Dimensional standards

lot requirementsSTREETbuildable areaFront 50 ft
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Uses

Prohibited23

Extracted standards

5 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Design review required

    No new building, structure or sign ... until design review approval has been granted

  • minimum front yard setback of 50 feet shall be required and maintained wherever a lot or parcel in any industrial zone abuts or is adjacent to a lot or parcel in any residential zone or use

  • Health Risk Assessment distance1,000 ft

    Health Risk Assessment (HRA) shall be prepared ... within 1,000 feet of a Residential Zone or use

  • minimum eight-foot high solid masonry wall shall be constructed along the property line

  • Outdoor display and storage restricted

    Except for the outdoor storage and display of aircraft, outdoor display and storage shall not be permitted except as specified in 19.285, 19.500, 19.505 and 19.510.

From the ordinance

The following uses are specifically prohibited in any industrial zone: Any residential use other than permitted caretaker housing... A minimum front yard setback of 50 feet shall be required and maintained wherever a lot or parcel in any industrial zone abuts or is adjacent to a lot or parcel in any residential zone or use. A minimum eight-foot high solid masonry wall shall be constructed along the property line.
19.130.025, 19.130.040

Use details

{
  "dropped_conditions": {
    "prohibited_uses": [
      "Cement, lime, gypsum or plaster of Paris manufacture, except that the manufacture of cement products shall be permitted"
    ]
  }
}