Dimensional standards
Servicing
- Geographic extent
- All residential properties
Extracted standards
9 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Illumination allowed
Illumination: Internally or externally illuminated consistent with section 17.75.080(C).
- Maximum number per entrance1 count
Maximum number: One per entrance.
- Maximum sign area40 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Maximum sign area: 40 square feet.
- Maximum structure heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft
Maximum structure height: Six feet.
- Maximum width6 ft
Maximum width: Six feet, including structure.
- Minimum subdivision units60 units
Only permitted for subdivisions of 60 or more units.
- Permit required
Permit required.
- Sign base width percentage40 pct
Sign structures larger than four square feet or taller than three feet shall include a sign base with an aggregate width of at least 40 percent of the width of the sign face.
- SetbackSetbackThe distance a building must be held back from a lot line. from property line5 ft
Setback: Minimum five feet from a property line.
From the ordinance
The following standards apply to permanent freestanding signs (ground-mounted directory signs and monument signs) on all residential properties... Maximum sign area: 40 square feet. Maximum structure height: Six feet. Maximum width: Six feet. Setback: Minimum five feet from a property line.