ARTICLE 18#

28 - APPLICATION SUBMITTAL REQUIREMENTS#

18.28.010 - General.#

(a) The application submittal requirements consist of elements that are common to all applications as well as requirements that are necessary only for certain types of applications. Common submittal requirements are indicated first followed by specific requirements of various types of applications. In some instances, additional submittal requirements may be specified as part of the supplemental or special development requirements of these regulations.

(b) Complete applications must be submitted, as required in these regulations, at the point of initiation of the land use review process. A separate application is required for each phase of a subdivision.

(Code 1994, § 15.07.010; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.020 - Common Submittal Requirements.#

Unless indicated otherwise in these regulations or by the Town Clerk, three copies of the application shall be submitted. Except for text amendments, all applications identified in CTC Article 18.24 shall include:

(a) An application form, signed by the owner of the property, in the format provided by the Town Clerk;

(b) A legal description of the property included in the application;

(d) The names and addresses of any owners or lessees of mineral rights for the property;

(e) The names and addresses of any property owners within 200 feet of any portion of the property;

(f) A statement of the purpose of the application and a brief description of the proposal;

(g) A vicinity map indicating the location of the property included in the land use application; and

(h) An application fee pursuant to CTC 18.04.080.

(Code 1994, § 15.07.020; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.030 - Drawing and Report Requirements.#

(a) General map requirements. Any maps or other graphic plans shall be drawn in black or dark blue waterproof ink or may be clearly legible blueprint copies or photocopies. The dimensions of all maps shall be 24 inches by 36 inches, 11 inches by 17 inches or 8 1/2 by 11 inches unless another size is approved by the Town Engineer prior to submittal of the application. However, no map shall exceed 24 inches by 36 inches. In the case of multiple sheets, a key map showing the relationship of individual sheets shall be provided and locations of adjacent sheets shall be indicated on each sheet. Each map or other graphic plan shall include:

(1) The section, township and range of the property included in the application;

(2) The name, address, and telephone number of the owner and applicant;

(3) The name, address, and telephone number of the person or firm that prepared the map and the date of preparation;

(4) A north arrow and scale which shall be one inch equals 50 feet; and

(5) [Content continues — the provided text ends here; remaining subsections (5) and subsequent sections 18.28.040 through 18.28.120 are not included in the source material provided.]

18.28.040 - Site Plan Requirements.

In addition to the requirements of CTC 18.28.020, any site plan required in these regulations shall include:

(a) The location of all existing and proposed buildings, utilities and other improvements on the property. A building envelope (a portion of the property within which a building may be located) may be shown for proposed buildings to allow minor adjustments;

(b) The title of the map located at the top of the map and in a title block in the lower right corner, which shall also indicate the type of application.

(c) General report requirements. All reports shall contain consecutively numbered pages and shall include, or clearly indicate by reference, any maps or other relevant elements required by these regulations, which are necessary for the report. Any report required by these regulations shall include:

(1) The name, address and telephone number of the person or firm that prepared the report and the date of preparation;

(2) The title of the report.

(d) Qualifications of preparers of maps and reports. All maps and reports must bear suitable evidence of the professional qualifications of the person responsible for the preparation of the map or report. Maps containing information pertaining to water supply, sanitation, wastewater treatment, utilities, drainage, soils, grading, streets, structures, or any other engineering information must be certified by a professional engineer licensed in the State. All required documents containing land survey descriptions and topographic maps must be certified by a professional land surveyor licensed in the State. All data submitted regarding environmental studies and other disciplines, not currently requiring registration by the State, must be accompanied by a resume of such qualifications sufficient to demonstrate the author's degree of expertise and experience. Geology maps and reports must be prepared and certified by a qualified geologist. Additional professional qualifications may be specified in other sections of these regulations.

(Code 1994, § 15.07.030; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.040 - Site Plan Review Applications.

In addition to the common submittal requirements contained in CTC 18.28.020, all applications for approval of a site plan shall include:

(a) The location and number of parking spaces for off-street parking and loading areas and the finished surface material of the parking areas (e.g., gravel, asphalt);

(b) A traffic circulation plan showing the direction of traffic flows and indicating the locations of entries and exits of parking lots and the relationships of parking lots to entrances and exits of any buildings;

(d) The location of all signs indicating the size, shape and height of each sign;

(e) The area and location of open space and recreation areas;

(f) The location and type of outdoor lighting;

(g) The location of existing and proposed fences, landscaping features and other methods of visual screening. The proposed landscaping plan shall indicate the method of maintenance of the landscaping as well as a list of type, size, and quantity of plant materials and the general location of the landscaping;

(h) The estimated date of completion of the proposed improvements; and

(i) Adjacent streets and rights-of-way and street improvements.

(Code 1994, § 15.07.040; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.050 - Text Amendment Applications.

Applications for text amendments shall include:

(a) An application form, signed by an owner of property located within the Town or the Mayor, in the format provided by the Town Clerk; and

(b) A statement of the purpose of the application, a brief description of the proposed text amendment, and the proposed new text.

(Code 1994, § 15.07.050; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.060 - Zoning Variance Applications.

In addition to the common submittal requirements contained in CTC 18.28.020, all applications for approval of a zoning variance shall include:

(a)

18.28.060 - Variance Applications.#

In addition to the common submittal requirements contained in CTC 18.28.020, all applications for approval of a variance shall include the following:

(a) A letter stating the reasons and justification for the request and that addresses all of the following criteria:

(1) That there are unique physical circumstances or conditions, such as irregularity, narrowness, shallowness or size of the lot, or exceptional topographical or other physical conditions peculiar to the affected property.

(2) That, because of such physical circumstances or conditions, the property cannot reasonably be developed in conformity with the provisions of this chapter.

(3) That such unnecessary hardship has not been created by the applicant.

(4) That the variance, if granted, will not alter the essential character of the neighborhood or district in which the property is located nor substantially or permanently impair the appropriate use or development of adjacent property.

(5) That the variance, if granted, is the minimum variance that will afford relief and is the least modification possible of this chapter's provisions that are in question.

(b) A plot plan and improvement survey showing the existing natural and manmade features, utilities and utility easements, and structures on the property and indicating the effects of the requested variance.

(c) The Board of Trustees has the power to vary or modify the application of the regulations or provisions of this chapter relating to the use, construction, or alteration of buildings or structures, or the use of land, so that the spirit of this chapter is observed, public safety and welfare secured and substantial justice done, provided the Board of Trustees finds that the aforementioned criteria have been satisfied.

(Code 1994, § 15.07.060; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.070 - Special Use Applications.#

In addition to the common submittal requirements contained in CTC 18.28.020, all applications for approval of a special use shall include a site plan prepared in conformance with CTC 18.28.040.

(Code 1994, § 15.07.070; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.080 - Rezoning (Amendments to the Zoning Map).#

In addition to the common submittal requirements contained in CTC 18.28.020, all applications for approval of a rezoning shall include a petition for rezoning signed by the owners of at least 50 percent of the area of land or area of lots subject to the rezoning application.

(Code 1994, § 15.07.080; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.090 - Subdivision Sketch Plan.#

(a) In addition to the common submittal requirements contained in CTC 18.28.020, all applications for approval of a subdivision sketch plan shall include the following information:

(1) Sketch plan map (ten copies). The applicant shall submit ten copies of the sketch plan map as part of the sketch plan application. The map shall clearly and accurately represent the character of the area of the proposed subdivision as well as the natural and manmade features on and near the site of the proposed subdivision. The map shall be of sufficient clarity and detail to allow an assessment of the physical design of the proposed subdivision. A poorly drawn or illegible plan is sufficient cause for its rejection. The map shall be submitted in both 24-inch by 36-inch and 11-inch by 17-inch formats unless all the required map information at a scale of one inch equals 50 feet can be presented on an 11-inch by 17-inch format. The following technical drawing requirements and information shall be adhered to and included on the sketch plan map:

a. The name of the proposed subdivision at the top of the map and in a title block in the lower right corner which shall not duplicate the name of any recorded subdivision in the County;

b. A vicinity map, at a scale of not less than one inch equals 2,000 feet, depicting the location of streets, highways and utility systems within one-half mile of any portion of the proposed subdivision. The vicinity map shall also show the natural

drainage courses of streams within one-half mile of any portion of the subdivision
with the limits of tributary areas shown where reasonable. A USGS quadrangle map at
the scale of one inch equals two thousand feet may be used as the basis of the vicinity
map;

c. A legal description of the site and indicated along the perimeter boundary of the
proposed subdivision;

d. Written legal description of the proposed subdivision;

e. Topography of the site of the proposed subdivision showing the existing topography,
at a minimum, five-foot contour intervals;

f. Names, mailing addresses and telephone numbers of: the owner of the property to be
subdivided, the applicant, designer, engineer, and surveyor that may be associated
with the preparation of the application;

g. The street and lot layout with the dimensions of all lots to the nearest foot (these
may be scaled values) and including the approximate area of each lot. The lots and
blocks shall be numbered consecutively;

h. Departing property lines, names and addresses of owners of record of all land parcels
adjoining the proposed subdivision including those separated only by a public right-of-way;

i. The location of the 100-year floodplain of any drainage on or adjacent to the site
of the proposed subdivision;

j. Labeled access to the site (Town street, County road, State highway, public right-of-way,
easement, etc.);

k. Location, type and size of existing and proposed utility lines, utility easements,
and other easements on and adjacent to the site of the proposed subdivision;

l. The location of existing available water and wastewater facilities and the proposed
extension of water and wastewater lines;

m. Location, scaled dimensions and legal description of existing lots, streets, alleys,
road rights-of-way, easements, irrigation ditches, waterways within and immediately
adjacent to the site of the proposed subdivision;

n. Sites to be reserved or dedicated to the public for parks, schools or other public
purposes;

o. Land use summary statement indicating:

1. Total area of the proposed subdivision;

2. Acreage of developable land;

3. Listing of all lots and tracts, proposed use of each lot or tract (i.e., single-family
residential, commercial, common area, future development, etc.) and the area of each
lot or tract;

4. Total number of residential and nonresidential lots and the area of land designated
for each type of use;

5. Statement of any uses other than detached single-family dwelling units;

6. Number of residential dwelling units, by type of dwelling unit;

7. Gross and net residential density (units per acre of developable land designated for
residential uses);

8. Total area of nonresidential floor space (if applicable);

9. Statement indicating the availability or lack of irrigation water.

(2) Supplemental sketch plan information (three copies). Three copies of the sketch plan supplemental information shall be submitted as part
of the sketch plan application. The information provided pursuant to this subsection
must contain sufficient detail for reviewers to determine the general adequacy and
feasibility of the proposed subdivision. The Town and the reviewing agencies shall
determine the adequacy of the information provided. The applicant shall be required
to submit additional technical information needed by a reviewing agency in order for
the agency to complete its review of the proposed subdivision. All maps and plans
shall be submitted at the same scale as the sketch plan and all proposed lot lines
shall be clearly shown on the maps and plans. The supplemental information shall
be submitted in the written or graphic format appropriate for the information being
submitted and shall include the following:

a. Proof of present legal ownership of the property to be subdivided including signed
statements from the owner as well as all lien holders and all other security interest

18.28.090 - Sketch Plan Submittal Requirements (continued)#

In addition to the common submittal requirements contained in CTC 18.28.020, all applications for approval of a sketch plan shall include the following information:

(a) The names and addresses of all owners of record and holders of interest in the property, together with a statement signed by all owners and holders of record indicating that the owners and interest holders do not object to the subdivision of the property as proposed on the sketch plan. If there are not any other holders of interest in the property, the owner shall so indicate by a signed statement;

(b) The proposed terms of reservations or dedications of sites for public and private common facilities;

(d) The method proposed for the maintenance of all public and common areas and facilities including provisions for the maintenance of the subdivision streets;

(e) A water supply report, which shall include the following information:

The expected water requirements of the subdivision at full development including the various water uses to be permitted and the manner in which these requirements will be met;
A conceptual water distribution plan prepared at the same scale as the sketch plan map.

(f) A wastewater disposal report prepared in accordance with the requirements of the Town Engineer including:

A general written description of the collection system to be designed per the requirements of the State Department of Public Health and Environment and the Town Engineer;
Evidence that the collection and treatment system will conform to all State and local laws and regulations;
A map of the wastewater collection system at the same scale as the sketch plan map showing the lots to be served and the site topography. The collection system may be shown on the sketch plan map;

(g) A soils report with maps and written information as appropriate including the following information:

A soils map showing the proposed subdivision including the lots and street alignments, the natural topography of the site shown by contour lines, the location of any soils test holes used in the investigation and the designation of soils types and their boundaries based on the National Cooperative Soil Survey prepared by the USDA Soil Conservation Service (SCS);
A table of interpretations of the soils types as prepared by the SCS. The report shall identify soils conditions that may preclude development of any part of the site or require particular design considerations; and

(h) A utility report identifying the utility companies that will provide electricity, natural gas, telephone, cable television, etc. to the proposed subdivision. The report shall reference the sketch plan map, which shall show the location of the utility facilities.

(Code 1994, § 15.07.090; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.100 - Final Subdivision Plan#

In addition to the common submittal requirements contained in CTC 18.28.020, all applications for approval of a final subdivision plan shall include the following information. Final plats and required engineering drawings shall be submitted in both 24-inch by 36-inch and 11-inch by 17-inch formats:

(a) Final subdivision plat (one reproducible Mylar and ten print copies). The applicant shall submit one reproducible final plat and ten print copies of the final plat. The final plat shall be drafted legibly, with black waterproof ink, on sheets of permanent reproducible material, such as Mylar, measuring 24 inches by 36 inches with clear margins of two inches on the left side of the plat and one-half inch on the remaining sides. Where multiple sheets are necessary to depict the total filing, the legal description of the subdivision boundary and all certifications and dedications shall be shown on the cover or title sheet and a key map indicating the location of subsequent sheets of the subdivision shall also be shown on the cover or title sheet. The scale of the final plat shall be no greater than one inch equals 50 feet. The final plat shall meet the minimum standards for land survey and subdivision plats as required by the laws of the State. All final plats shall clearly and accurately [text continues in next section].

Final Plat Requirements#

The final plat shall set forth and include the following information in the format prescribed, in addition to any other information required to be shown on the final plat as a condition of the sketch plan approval.

(1) Title#

The name of the subdivision at the top of the final plat and in a title block in the lower right-hand corner.

(2) Legal Description#

The legal description of the boundary of the subdivision.

(3) Survey and Monumentation Data#

The date of the survey and monumentation of the subdivision and the location and description of the primary control points for the survey and all of the property monumentation on the perimeter boundary of the subdivision and the basis of bearing of the survey.

(4) Scale and North Arrow#

The definition of the scale of the final plat and an arrow indicating north relative to the basis of bearing used. The scale shall be one inch equals 20, 30, 40, or 50 feet.

(5) Street and Lot Identification#

The names of all streets or roads, block indicators, and lot numbers depicted in a manner permitting easy lot identification, as approved by the Town.

(6) Vicinity Map#

A vicinity map at a scale of one inch equals two thousand feet showing the subdivision in relation to section lines and township and range lines.

(7) Boundary and Dimension Standards#

The perimeter boundary and the boundaries of lots, blocks, and street rights-of-way shall be drawn in solid black lines; easements or other rights-of-way shall be shown in dashed lines. Each lot shall be numbered with dimensions and area noted. The following standards shall be complied with:

Item	Standard
a. Perimeter and lot boundaries	Shown to the nearest 0.01 foot
b. Areas of less than one acre	Shown to the nearest one square foot
b. Areas of greater than one acre	Shown to the nearest 0.001 acre
c. Bearings	Shown to the nearest second of arc
d. Central angles of all curves	Shown to the nearest second of arc
e. Curve radii, arc lengths, tangent lengths, and other curve data	Shown to the nearest 0.01 foot
f. Widths and other dimensions of all easements, rights-of-way, and roads	Shown

(8) Irrigation and Drainage Facilities#

The location of all irrigation facilities and major drainage channels and facilities shall be shown.

(9) Certifications and Other Information#

The final plat shall also include the following certifications and other information as required by the laws of the State. The text of the certifications on final plats shall be that approved by the Town. The Town Clerk will provide copies of the certifications approved by the Town:

a. Owners of Record#

The names and addresses of all owners of record of the property being subdivided, including the owners of surface and mineral estates, mineral lessees, and holders of liens or security interests of record in the property.

b. Certificate of Dedication and Ownership#

A certificate of dedication and ownership executed by all owners of the property to be subdivided. Each signature shall be notarized. An indication of the purpose for dedication or reservation of sites other than residential lots shall be included in the certification.

c. Surveyor's Certificate#

A surveyor's certificate signed by a registered professional land surveyor licensed by the State.

d. Attorney's or Title Company Certificate#

An attorney's certificate or title company certificate indicating that all lands shown on the final plat are free and clear of liens, claims, or encumbrances of record except as noted.

A certificate signed by all holders of any recorded security interest in the property to be subdivided consenting to the subdivision. The certificate shall include a subordination provision if an easement or land is being dedicated to the public.

f. Town Board of Trustees Certificate#

The Town Board of Trustees certificate.

g. County Clerk and Recorder's Certificate#

The County Clerk and Recorder's Certificate, which shall indicate the time of recording and reception number. Note: This certificate will not be completed until the final plat is recorded.

h. Town Clerk's Certificate#

Town Clerk's certificate certifying that the plat is complete and ready for recordation.

(10) Condominium Units#

If the subdivision includes condominium units, a separate condominium map shall be submitted in addition to the final plat. The condominium map shall be prepared by

a professional surveyor licensed by the State and shall be submitted within 30 days
of completion of construction of each condominium building. If the condominiums are
a conversion of existing structures, the condominium map shall be submitted with the
final plat. The condominium map shall depict the following information:

a. Vertical and horizontal location of each air space unit with dimensions and area indicated;

b. The relation of individual units to limited and general common elements;

c. Designation of any limited common elements reserved for the exclusive use of any individual
unit;

d. The identification of each condominium unit by number or other symbol, including both
the unit and any limited common elements reserved for the unit;

e. The location of all exterior and internal load bearing walls held in common ownership;
and

f. The elevation of each condominium unit in relation to a bench mark established on
one of the permanent exterior boundary monuments of the platted subdivision in which
the condominium is located, with a statement describing the U.S. Government benchmark
to which the project benchmark is referenced.

(b) Supplemental information (three copies). Three copies of the final plat supplemental information shall be submitted simultaneously
with the final plat. Information shall be submitted in a written or graphic format
appropriate for the information being submitted and shall include the following information:

(1) The scale of all engineering drawings which shall be one inch equals 20, 30, 40 or
50 feet and a bar scale shall be provided as well as a written description of the
plan view scale;

(2) Engineering plans, descriptions and cost estimates for streets and roads (including
curb and gutter, sidewalks, traffic control devices, signage, and street lighting),
drainage facilities, water distribution lines, wastewater collection and treatment
facilities, bridges, telephone lines and other telephone equipment, electric power
lines and other electric equipment, natural gas pipes and other natural gas equipment,
cable television distribution cables and other equipment, irrigation facilities, and
any other utilities, public improvements or subdivision improvements that may be required
as part of the sketch or final plan approvals. All plans shall be prepared in accordance
with the criteria established in these regulations or by the Town Engineer and shall
be marked "Approved For Construction" and signed by an official of the appropriate
service authority or utility company or the Town Engineer. All engineering plans shall
be prepared and signed by a professional engineer licensed by the State. Engineering
plans shall specifically include the following items:

a. A street plan and profile prepared per the specifications of the Town Engineer including
graphic alignment, dimensions of right-of-way widths, curve radii and tangent lengths.
The street plan shall contain sufficient detail to ensure that the proposed street
plan will satisfy Town requirements and bears logical relationships to the grades
of existing public streets at the point of intersection. The proposed typical structural
and geometric cross sections; location, type, and approximate size of appurtenant
structures such as bridges and culverts, and traffic control devices shall be shown;

b. A drainage report, including the following data. Drainage criteria set forth by the
Town Engineer shall be used as a guideline:

1. A contour map defining on site drainage basins and illustrating existing drainage
patterns, paths of flow and concentration points with estimates of contributory acreage
and the peak flow of runoff;

2. A USGS contour map (7 1/2 minute quadrangle) showing all off-site drainage basins
which drain through the subdivision and illustrating paths of flow with estimates
of contributory acreage and peak flow of runoff;

3. A sketch of the proposed subdivision showing the consequent changes in the drainage

Section 18.XX.XXX - Subdivision Improvements and Final Plat Requirements (Continued)#

(b) Final Plat Application Requirements (Continued)#

(2) Supporting Documents (Continued)#

c. Irrigation Plan

If irrigation water will remain with the property, an irrigation plan shall be submitted which shall designate, on copies of the sketch plan map, the irrigation water distribution plan including all distribution facilities such as ditches, diversion structures, lakes, easements, etc. A narrative shall accompany the plan explaining the nature of the organization that will own the irrigation water and the entity that will own and maintain the irrigation distribution system. A letter from any ditch company presently responsible for any irrigation system providing irrigation water to the site shall also be submitted. The ditch company letter shall indicate the approval in concept of the sketch irrigation plan and shall also indicate that the other users of the ditch company's water and facilities will not be injured by the development of the approved subdivision.

d. Wastewater Collection System Plans and Profiles

Wastewater collection system plans and profiles shall be submitted.

e. Water Distribution Plans

Water distribution plans shall be submitted, including calculations of fire flow and indicating locations of all existing and proposed fire hydrants and valves.

(3) Subdivision Improvements Agreement#

A subdivision improvements agreement prepared in accordance with CTC 18.04.160 shall be submitted.

(4) Certification of County Treasurer#

Certification of the County Treasurer that all applicable ad valorem taxes have been paid and are not in arrears shall be submitted.

(5) Subdivision Declaration of Protective Covenants and Homeowners Association Documents#

The subdivision declaration of protective covenants and homeowners association documents shall be prepared or approved by an attorney licensed in the State. If applicable, said documents shall comply with the requirements of the Colorado Common Interest Ownership Act (CCIOA), C.R.S. § 38-33.3-101 et seq.

(6) Evidence of Services Conformance#

Evidence that all services including water, wastewater disposal, and street access conform to State and local laws and shall be available to each subdivision lot and condominium unit in a manner permitted by law and the covenants of the subdivision shall be submitted.

(7) State Land Survey Monument Record Forms#

A copy of the State land survey monument record forms for any survey corners as required to be filed by State law shall be submitted.

(8) Condominium Declaration#

Condominium declaration (applicable if the subdivision includes condominium units) shall be prepared or approved by an attorney licensed to practice law in the State. The declaration shall comply with the requirements of CCIOA.

(c) Release or Subordination of Existing Encumbrances#

Release or subordination of any existing encumbrances against those portions of the [property/subdivision] shall be [provided/submitted] [as applicable].

(d) Park fees. The appropriate fees in lieu of parkland dedications as prescribed in CTC 18.04.110 shall be submitted simultaneously with the final plat.

(e) Monumentation. Permanent monuments on the perimeter boundary of the subdivision must be set before the final subdivision plat is recorded. The monuments, three inches in diameter, are to be set permanently in concrete or solid rock. Witness corners shall be set for inaccessible corners by authority of the County Surveyor pursuant to the provisions of State law. All aliquot corners, established in the procedure of subdividing a tract of land shall be reported to the County Surveyor and the appropriate forms submitted. All monumentation shall have magnetic attraction and shall include a durable cap securely anchored to the monument stamped with the Colorado registration number of the surveyor responsible for the establishment of the monument.

(1) Lot corners or corners witnessed or referenced as lot corners shall be five-eighths inch iron rod or rebar 24 inches long solidly embedded in the ground with a durable cap bearing the Colorado registration number of the surveyor responsible for the establishment of the corner.

(2) Street and roadway centerline monuments shall also be set at each point of curvature and each point of tangency within 30 days of completion of construction of the road or street. Such monuments shall be five-eighths inch iron rod or rebar, 24 inches long solidly embedded in the ground with a durable cap bearing the State registration number of the surveyor responsible for the establishment of the monument. Street monuments shall be located four inches below the finished surface of the roadway.

(Code 1994, § 15.07.100; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.110 - Minor Subdivision.

The submittal requirements for minor subdivisions are the same as for a final subdivision plan (see CTC 18.28.100).

(Code 1994, § 15.07.110; Adopted by Ord. 02 Series of 2023 on 12/5/2023)

18.28.120 - Amended Plats.

Amended plats are final subdivision plats and shall include all of the items required for final plats as specified in CTC 18.28.100(a) as well as the information required in the common submittal requirements contained in CTC 18.28.110(a).

(Code 1994, § 15.07.120; Adopted by Ord. 02 Series of 2023 on 12/5/2023)