Shenandoah, Virginia · District

R-2

Residential district R-2
ResidentialSingle FamilyAll Shenandoah districts0

Dimensional standards

R-2 lot requirementsSTREETSTREETFront 30 ftRear 25 ftSide 10 ftStreet side 30 ftMin width 50 ftMIN LOT AREA7,500 sq ftMAX HEIGHT35 ft / 3 stories
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Uses

Extracted standards

7 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

From the ordinance

All lots must be served by public water and sewer. The minimum lot area shall be 7,500 square feet for all permitted uses. The minimum lot width at the setback line shall be 50 feet. Structures shall be located 30 feet or more from any street right-of-way. Each side yard shall be at least ten feet. The minimum rear yard shall be 25 feet. Buildings may be erected up to three stories, but not to exceed 35 feet in height.
Sec. 50-67