Galax, Virginia · District

R-4

Residential Mobile Home Subdivision District
ResidentialMobile HomeAll Galax districts0

Dimensional standards

R-4 lot requirementsSTREETSTREETFront 80 ftRear 40 ftSide 40 ftStreet side 20 ftMin width 50 ftMIN LOT AREA5,000 sq ftMIN FRONTAGE50 ftMAX HEIGHT35 ftMAX LOT COVERAGE45%
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Uses

Extracted standards

10 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Anchoring required

    The unit shall be located on the site and anchored in accordance with the provisions of the Virginia Uniform Statewide Building Code.

  • Federal/state construction standards

    Only those mobile homes constructed in accordance with regulations promulgated under the Federal Manufactured Housing Construction and Safety Standards Act or the Virginia Industrialized Building Unit and Mobile Home Safety Act...

  • Permanent masonry foundation required

    A permanent masonry foundation, designed, constructed and maintained so as to completely conceal the undercarriage of the unit and fixtures thereof, shall be installed around the entire perimeter of each unit.

  • The minimum gross area for any R-4 District shall be five acres.

  • Wheels and tongues removed

    All wheels, tongues and similar devices designed for the transportation of the unit and which are capable of removal shall be removed.

Setback

From the ordinance

The minimum lot area served by public water and sewer systems for one- and two-family detached or two-family dwellings is 5,000 square feet per unit.
Article VIII, § 160-72 through § 160-81