Essex County Unincorporated, Virginia · District

I-1

Light Industrial District

Dimensional standards

Uses

Accessory4

  • Location and design of all planned stormwater control devices;
  • Procedures for implementing non-structural stormwater control practices and techniques;
  • Pre- and post-development non-point source pollutant loadings with supporting documentation of all utilized coefficients
  • For facilities, verification of structural soundness, including a Professional Engineer or Class III-B Surveyor Certific

Extracted standards

3 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Building facade materials

    Building facades shall not be constructed of unadorned concrete block, unfinished corrugated metal or unfinished sheet metal. A façade shall not consist of architectural materials inferior in quality, appearance or detail to any other façade, except that use of different materials on different facades shall be permitted.

  • Views of junction and accessory boxes visible from roads or adjacent property shall either be integrated into the architectural treatment of the building, or their view minimized by landscaping.

From the ordinance

Within 100 feet of a R District, the height shall not exceed the lesser of 2.5 stories or 35 feet.
Section 36.256

Use details

{
  "dropped_conditions": {
    "accessory_uses": [
      "**Contents of Plan.** The stormwater management plan shall contain maps, charts, graphs, tables, photographs, narrative ",
      "Site-specific facilities shall be designed for the ultimate development of the contributing watershed based on zoning, c",
      "All engineering calculations must be performed in accordance with procedures outlined in the current edition of the Virg",
      "The plan shall establish a long-term schedule for inspection and maintenance of stormwater management facilities that in"
    ]
  }
}