Ashland

Only the following signs are permitted in RR-1, R-1, R-2, and PMH districts: Temporary sign... Signage within the RR-1, R-1, R-2, and PMH districts may not be illuminated in any way.

Only the following signs are permitted in HE and PUD districts: Window sign, Temporary sign... Signage within the HE and PUD districts may be illuminated in accordance with Sec. 21-209.

Only the following signs are permitted in HE and PUD districts: Window sign, Temporary sign... Signage within the HE and PUD districts may be illuminated in accordance with Sec. 21-209.

Only the following signs are permitted in B-2, B-4, M-1, and PSC districts: Temporary sign, Window sign... Signage within the B-2, B-4, M-1, and PSC districts may be illuminated in accordance with Sec. 21-209.

The following signs are prohibited in all zoning districts: Billboards. Unsafe signs. Portable signs. Roof signs. Attention getting devices...

Any violation of the following provisions of this chapter shall be deemed an infraction and shall be punishable by civil penalty of one hundred dollars ($100.00) for the initial summons, and one hundred fifty dollars ($150.00) for each additional summons: ... ATC Article XX, all sections. Signs.

Screening which meets the standards of paragraph (e) of this section shall be provided on any lot where an off-street parking area for five (5) or more vehicles is located closer than fifty (50) feet to a lot in an RR-1 or residential district...

A-frame signs may be placed on sidewalks that have a minimum width of sixty (60) inches or five (5) feet and then the sign must be placed to allow a minimum of thirty-six (36) inches of space for an individual in a wheelchair to pass.

No A-frame sign shall be permitted to exceed two (2) feet in width and three (3) feet in height. Each side must be at least one (1) inch in thickness. It shall be located on the sidewalk or on the primary pedestrian path and cannot be placed more than four (4) feet from the entrance of the business it is advertising.

The total area of attached signs located on a lot shall not exceed one and one-half (1½) square feet of sign area for each linear foot of main building/business frontage

The total area of the electronic changeable copy area for such signs shall not exceed 40% of the total area of the sign area permitted for that site.

Directional signs shall not exceed four (4) square feet in area or five (5) feet in height, and shall not be located within ten (10) feet of any street line or other property line.

The total area of the electronic message display area for such signs shall not exceed 40% of the total area of the sign area permitted for that site.

No freestanding sign shall be located within ten (10) feet of any property line.

Fuel pump signs shall not exceed two (2) square feet in area on each face of a fuel pump.

A sign not exceeding the two (2) square feet in area attached to a building and identifying a home occupation located within such building.

Marquee signs shall only be permitted for theaters and live production venues.

One (1) neighborhood sign may be located at each street entrance to a residential neighborhood, provided that a total of not more than two (2) such signs shall be erected for a neighborhood, and provided further that each such signs shall not exceed thirty-two (32) square feet in area or six (6) feet in height, and shall not be located within five (5) feet of any street line or other property line.

Projecting signs shall have a minimum under-clearance of eight (8) feet and shall not project from the building greater than ten (10) feet or more than two (2) feet less than the width of any sidewalk over which such sign projects.

The height of such sign shall not exceed eighteen (18) feet; and the area of such sign shall not exceed one hundred twenty (120) square feet. When a shared sign is utilized, no other freestanding sign shall be permitted on either parcel.