R-1.5
Dimensional standards
Lot
Height & bulk
- Minimum landscaping
- 20%
Uses
Permitted by right6
Conditional / special use10
Extracted standards
8 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Affordable housing dedication30 pct
A minimum of 30% of the difference in maximum number of lots permitted pursuant to R-1 and R-1.5 with min lot area 3,500 sq ft are dedicated to the Town for affordable housing.
- Minimum alley constructed surface16 ft
Minimum of a 16 foot constructed surface.
- Minimum alley right-of-way20 ft
Alleys shall require a minimum of 20 feet of dedicated right of way with a minimum of a 16 foot constructed surface.
Front setback, min. (feet) | 10, 18 for garages
- Maximum front setbackSetbackThe distance a building must be held back from a lot line. for residences15 ft
Front setback, max. (feet) | 15 for residences
- Reduced minimum lot areaMinimum lot areaThe smallest parcel on which the district allows anything to be built.3,500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The minimum lot area may be reduced to 3,500 sq ft and minimum lot width to 35 ft if conditions are satisfied.
- Park space requirement
Parks shall be constructed by the subdivider, including landscaping and amenities, as part of the overall plans for the subdivision.
Parking
Off street parking shall be located at the rear of lots abutting an alley.
From the ordinance
Table 2.6: R-1.5 District Dimensional Standards: Lot area min 5,500 sq ft; lot width min 55 ft; front setback min 10 ft; rear setback min 15 ft; required landscaping 20%.