Dimensional standards
Lot
Density
Height & bulk
Housing
Uses
Permitted by right3
Conditional / special use5
Accessory2
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Height
- Maximum accessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. structure heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.14 ft
Accessory structures shall not exceed fourteen feet.
Other
- Maximum accessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. structure floor area1,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
No accessory structure in the RLD Zoning District shall exceed 1,000 sq. ft. in floor area.
Minimum side setback for lots with average width 45 ft or less shall be 10% of lot width or 3 ft on one side.
- Variable yards for interior lots
One yard: ten feet and the other: five feet plus two feet for each foot of building height over twenty-four feet.
From the ordinance
Maximum Density 9 units/net acre, Minimum Lot Size 2.5 acres, Maximum Height 35 ft, Front Setback 30 ft, Interior Side 5 ft, Street Side 10 ft, Rear 5 ft, Max Lot Coverage 50%, Accessory Height 14 ft, Min Building Separation 5 ft, Parking 1 space/unit.
Parking requirements
{
"single_family": "1 space"
}