Mammoth Lakes
Zoning districts
2 districts, grouped by category.
General provisions
312 rules that bind every district rather than one — sign regulations, parking, floodplain and the rest of the code’s citywide chapters.
This use does not include manufacturing of cannabis products using volatile solvents, as that use is prohibited within the Town limits.
All commercial and industrial activities, other than off-street parking, shall be conducted entirely within an enclosed structure, except as may otherwise be allowed in compliance with this chapter.
All commercial and industrial activities, other than off-street parking, shall be conducted entirely within an enclosed structure, except as may otherwise be allowed in compliance with this chapter.
RR (Rural Residential) District. This zoning district is intended as an area for single-family rural residential development with larger lots and lower density... Transient occupancy or rental, hotels and motels, and group living quarters uses are not permitted in this zone. Bed and breakfast uses are permitted only with a use permit.
RSF (Residential Single-Family) District. This zone is intended as an area for single-family residential development. Transient occupancy or rental, hotels and motels, bed and breakfast, and group living quarters uses are not permitted in this zone.
Transient occupancy or rental, hotels and motels, and group living quarters uses are not permitted in this zone. Bed and breakfast uses are permitted only with a use permit.
Transient occupancy or rental, hotels and motels, bed and breakfast, and group living quarters uses are not permitted in this zone.
When the density calculation results in a fraction or decimal ... it shall be rounded down to the next lower whole number.
When the density calculation results in a fraction or decimal ... it may be rounded to the next higher whole number only when all of the following criteria are met...
One manager's unit for hotels, motels, fractional use projects and multiple-family developments of 20 or more units ... may be excluded from the density calculations.
A minimum five-foot front or street-side setback shall be allowed for the construction of an attached or unattached private garage and associated entries (not, including rooms), provided that the following conditions are met: (1) The elevation of the lot, at all points measured 20 feet from the property line adjacent to the street from which access will be taken, shall be at least seven feet above the elevation at the centerline of the street; (2) No portion of the garage shall exceed 15 feet in overall height... (5) No portion of the garage shall be located closer than 30 feet to the centerline of the street
A minimum five-foot front or street-side setback shall be allowed for the construction of an attached or unattached private garage...
The distance between any construction above 8,250 feet and a 30 percent or greater slope which occupies more than one-quarter of the parcel shall be 30 feet except as provided below.
The distance between any construction above 8,250 feet and a 30 percent or greater slope ... shall be 30 feet.
Downtown District (D) is intended to provide a thriving mix of residential, nonresidential, and lodging uses... The maximum FAR is 2.0.
The Old Mammoth Road District (OMR) is intended as an arts and culture district oriented toward medium scale commercial development along Old Mammoth Road... The maximum FAR is 2.0.
The Mixed Lodging/Residential (MLR) District is intended to allow one or more of a variety of lodging, residential, and nonresidential uses to encourage a mix of uses and emphasize transient occupancy. The maximum FAR is 2.0.
The maximum FAR is 2.0. The D zoning district is consistent with the Commercial 2 (C-2) land use designation.
The maximum FAR is 2.0. The OMR zoning district is consistent with the Commercial 2 (C-2) land use designation.
The maximum FAR is 2.0. The MLR zoning district is intended to allow one or more of a variety of lodging, residential, and nonresidential uses.
Source documents
The chapters of the adopted code that were retrieved, read and extracted from. Everything above traces back to one of these.