Mariposa County Unincorporated, California · District

M-2

Heavy Manufacturing and Industrial Zone-2

Dimensional standards

M-2 lot requirementsSTREETMIN LOT AREA40 acMAX DENSITY0.03 du/ac
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Uses

Permitted by right19

Prohibited2

Extracted standards

6 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Design

  • Design criteria per CG-1

    The design criteria for the M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.040 of this title.

Other

  • Location requirement

    This zone shall be located on, or easily accessible to state highways and designated primary county roads, i.e. collector and arterial roads as specified on the current official county road map, as amended from time to time.

  • Permits per CG-1

    Granting of permits for an M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.070 of this title.

  • Phasing per CG-1

    Project phasing in the M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.050 of this title.

  • Procedures per CG-1

    Procedures for establishing an M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.060 of this title.

  • The setback standards and parking or development within the setbacks for the M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.030 of this title.

From the ordinance

Minimum parcel or lot sizes: No parcel of real property shall be divided or split into two (2) or more parcels or lots by voluntary transfer, court action or other conveyance where any one (1) of the parcels or lots so created will be less than forty (40) acres or a legal quarter-quarter section in gross area. Density: One (1) single family residence per forty (40) acres or a legal quarter-quarter section in gross area.
17.104.020