Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Construction sign lighting
The sign shall be unlighted.
- Construction sign maximum area (commercial/multi-familyMultifamily dwellingA building of four or more dwelling units. Where zoning is most restrictive./subdivision)24 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Signs for commercial, quasi-public, multiple-family residential and subdivision projects shall not exceed twenty-four (24) square feet of area per sign face.
- Construction sign maximum area (single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. residential)6 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The signs shall not exceed six (6) square feet in area per sign face for single-family residential projects.
- Construction sign removal
Construction signs may be established upon the site of an active construction project for which town-issued construction permits are in effect and shall be removed upon completion of construction and/or expiration of all town issued ministerial construction permits, whichever occurs first.
From the ordinance
Construction signs are allowed in any zoning district, subject to the following limitations: 1. Construction signs may be established upon the site of an active construction project... 2. The sign shall be unlighted. 3. The sign shall indicate only the nature of the construction... 4. The signs shall not exceed six (6) square feet in area per sign face for single-family residential projects. Signs for commercial, quasi-public, multiple-family residential and subdivision projects shall not exceed twenty-four (24) square feet of area per sign face.