Extracted standards
13 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Addition resulting in home larger than maximum permissible floor area without design review
An addition that results in a home that is larger than the maximum permissible floor area without design review under Chapter 17.6
- Addition exceeding 1,000 square feetsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.1,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
An addition which exceeds one thousand (1,000) square feet
- Addition over 199 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. on small or narrow lot199 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
An addition over one hundred ninety-nine (199) square feet in size which is proposed on a small or narrow lot as defined in Section 17.30.8
- Addition over 199 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. resulting in total floor area exceeding 7,000 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.7,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
An addition over one hundred ninety-nine (199) square feet in size which will result in a residence with a total floor area exceeding seven thousand (7,000) square feet
- Addition over 500 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. and over 18 ft heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. in ridgeline/environmental preservation overlayOverlay districtA second set of rules laid over the base district, adding requirements without replacing it.500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
An addition over five hundred (500) square feet of floor area and over eighteen (18) feet in height located partially or entirely in the ridgeline or environmental preservation overlay district
- Addition within 5 years of prior approval5 years
An addition, including one under two hundred (200) square feet, will be subject to design review if an approval for either a new residence or for an exterior addition has been granted for the property within the past five years
- Addition of habitable space in attic/basement with neighbor request
An addition of newly created habitable space in an attic or basement which is fully contained within the building envelope of any conforming or legally nonconforming single-family residential structure, as determined by the Zoning Administrator and an affected neighbor requests design review
- Exterior change of nonresidential building
An exterior change of any nonresidential building in any district, except for repair work and minor alterations
- New multifamilyMultifamily dwellingA building of four or more dwelling units. Where zoning is most restrictive. residential building in specified districts
A new, multifamily residential building in the RM, RH, DC, PD, and SP districts
- New nonresidential building in specified districts
A new nonresidential building in the DC, DCOR, DG, DO, PS, PR, OS, PD, and SP districts
A new single-family home that is not a renovation
- Renovation with door/window changes and neighbor request
A renovation which includes changes in doors or windows, or both, and an affected neighbor requests design review in accordance with Subsection 17.42.1.B
- Addition creating a second story
An addition which creates a second story above an existing single story residence and an addition of a second story under an existing single story residence if the City receives a request for design review where one does not presently exist
From the ordinance
Design review approval prior to issuance of a building permit is required for a project which meets any one or more of the following descriptions: ...