Dimensional standards
Density
Height & bulk
Housing
- Single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours.
- prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
- Two-family
- by_right
- Three-family
- by_right
- Four-plus family
- by_right
Uses
Permitted by right1
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Mechanical equipment screening required
Exterior mechanical equipment (except solar collectors) must be screened from off-site views.
- Minimum shared open spaceOpen spaceLand a development must leave unbuilt, sometimes required to be usable or planted. per unit100 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Outdoor common area(s) of at least one hundred (100) square feet per dwelling unit shall be provided for active and passive group recreation.
- Minimum trash enclosure setbackSetbackThe distance a building must be held back from a lot line. from interior property lines5 ft
Trash and recycling enclosures may not be located within five feet of interior property lines or within the street fronting setbacks.
- Minimum washing machines per dwelling unitsDwelling unitOne independent home: its own kitchen, bathroom and entrance.0.07 ratio
Constructing a laundry room with the equivalent of one standard washing machine for each fifteen (15) dwelling units and an equivalent capacity in automatic clothes dryers.
From the ordinance
High Density Overlay District development standards including density, open space, laundry, etc.