Dimensional standards
Servicing
- Applies near
- M-1 districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. boundary
- Applies within
- 50 ft
- Geographic extent
- within 50 feet of the boundary line between an M-1 districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. and a residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.
Extracted standards
3 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- ProhibitedProhibitedNot allowed in the district at all, short of rezoning or a variance. sign lighting colors
No red, green or amber lights or illuminated signs may be placed in such position that they could reasonably be expected to interfere with or be confused with any official traffic control device or traffic signal or official directional guide signs.
- Sign illumination glare control
Lights used to illuminate signs or advertising structures shall be so installed as to concentrate the illumination on the sign or advertising structure and so as to minimize glare upon a public street or adjacent property.
- Sign setbackSetbackThe distance a building must be held back from a lot line. from residential districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. boundary50 ft
No sign or advertising structure shall be located within fifty feet of the boundary line between an M-1 district and a residential district, when such sign or advertising structure faces the residential district.
From the ordinance
No sign or advertising structure shall be located within fifty feet of the boundary line between an M-1 district and a residential district, when such sign or advertising structure faces the residential district.