Sec. 7-9-51.1 through 7-9-51.8
Dimensional standards
Servicing
- Geographic extent
- Applies to any districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. where the districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. symbol is followed by (SR) suffix
Extracted standards
7 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum aggregate wall sign area per business150 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The total aggregate sign area for such signs shall not exceed one hundred fifty (150) square feet for each business.
- Maximum monument/ground sign area50 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
One (1) business or identification sign, including the foundation, not exceeding fifty (50) square feet in area or four (4) feet in height is permitted.
- Maximum monument/ground sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.4 ft
One (1) business or identification sign, including the foundation, not exceeding fifty (50) square feet in area or four (4) feet in height is permitted.
- Maximum temporary sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.16 ft
Temporary construction signs, real estate signs and travel direction signs are permitted... no such sign shall be more than sixteen (16) feet in height.
- Maximum wall sign area per linear foot of building frontageFrontageThe length of a lot line that touches a public street.1 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000./ft
Business or identification wall signs shall not exceed one (1) square foot of sign area for each linear foot of frontage of the building, or portion thereof, involved.
- Maximum wall sign area for frontageFrontageThe length of a lot line that touches a public street. less than 25 feet25 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
If the building frontage of any business is less than twenty-five (25) feet, only one (1) sign, having a maximum area of twenty-five (25) square feet, shall be permitted for each such business.
The following signs are prohibited: (a) Off-site signs. (b) Roof and projecting signs. (c) Banner signs. (d) Electronic message center signs. (e) Portable signs. (f) Signs specifically prohibited by the base district. (g) Pole signs.
From the ordinance
Business or identification wall signs shall not exceed one (1) square foot of sign area for each linear foot of frontage... total aggregate sign area shall not exceed one hundred fifty (150) square feet... Monument/ground signs: one sign not exceeding fifty (50) square feet in area or four (4) feet in height... Temporary signs: no such sign shall be more than sixteen (16) feet in height... Prohibited: off-site, roof, projecting, banner, electronic message center, portable, pole signs.