Monterey County Unincorporated, California · General provision
21.60.110
Dimensional standards
Servicing
- Geographic extent
- Design Control (D) combining districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.
Extracted standards
3 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Additional center sign area in commercial/industrial centers35 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
In commercial and industrial centers where more than one establishment exists, the center may have an additional thirty-five (35) square feet of signage to identify the center.
- Maximum total sign area per establishment in commercial/industrial zones35 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Where signs are allowable under the regulations of the zoning districts identified in Section 21.60.090, each establishment shall be allowed in the aggregate thirty-five (35) square feet of signage.
- Maximum total sign area in residential/agriculturalAgricultureRaising crops or livestock, generally including the structures that serve them. zones35 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Where signs are allowable under the regulations of the zoning districts identified in Sections 21.60.070 and 21.60.080, the total area of such signs shall not exceed thirty-five (35) square feet in the aggregate.
From the ordinance
Where signs are allowable under the regulations of the zoning districts identified in Sections 21.60.070 and 21.60.080, the total area of such signs shall not exceed thirty-five (35) square feet in the aggregate. This limitation in total area shall apply even though the use has frontage on two or more streets. Where signs are allowable under the regulations of the zoning districts identified in Section 21.60.090, each establishment shall be allowed in the aggregate thirty-five (35) square feet of signage. In commercial and industrial centers where more than one establishment exists, the center may have an additional thirty-five (35) square feet of signage to identify the center. Such signs may not, however, identify specific businesses within the center.