Dimensional standards
Extracted standards
18 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Afterhours container residential setbackSetbackThe distance a building must be held back from a lot line.100 ft
Any containers provided for afterhours donation of recyclable materials shall be permanently located at least 100 feet from any residential zone, constructed of sturdy, rust proof or painted material, have sufficient capacity to accommodate materials collected, and be secured from unauthorized entry or removal of materials.
- Large collection facility enclosure required
The facility shall be located within an enclosed structure or an area enclosed on all sides by a solid masonry wall.
- Large collection facility residential setbackSetbackThe distance a building must be held back from a lot line.50 ft
The facility shall be located a minimum of 50 feet from a parcel zoned or occupied for residential use.
- Noise compliance
Exterior noise shall meet the requirements of Chapter 8.20.
- Processing facility residential setbackSetbackThe distance a building must be held back from a lot line.50 ft
The facility shall be located a minimum of 50 feet from a parcel zoned or occupied for residential use or noise sensitive receptors (e.g., hospital and schools) and shall be located within an enclosed building except for incidental storage.
- Refuse disposal required
Facilities shall maintain adequate on-site refuse containers for the disposal of non-recyclable and non-hazardous waste materials.
- Reverse vending machine accessory useAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office.
Each machine shall be installed only as an accessory use to an allowed primary use and shall not require additional parking.
- Reverse vending machine hours
The machines shall have operating hours which are the same as the operating hours of the primary use.
- Reverse vending machine lighting
Each machine shall be illuminated to ensure comfortable and safe operation if the operating hours are between dusk and dawn. The lighting shall be in compliance with Section 17.36.030.
- Reverse vending machine location30 ft
If located outside of a structure, the machine shall not occupy parking spaces required by the primary use and shall be located within 30 feet of a building entrance and shall be constructed of durable waterproof and rustproof materials.
- Reverse vending machine maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.8 ft
When located outdoors, the area occupied by the machines shall not exceed a total of five machines with a maximum area of 50 square feet, including any protective enclosure, or eight feet in height.
- Reverse vending machine maximum size50 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
When located outdoors, the area occupied by the machines shall not exceed a total of five machines with a maximum area of 50 square feet, including any protective enclosure, or eight feet in height.
- Reverse vending machine sign area4 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Signs shall not exceed a maximum of four square feet on each machine, exclusive of operating instructions.
- Sign requirements
Facilities shall be provided with identification and information signs as follows, provided the signs are consistent with Chapter 17.48. 1. Collection containers and reverse vending machines shall be clearly marked to identify the type of material which may be deposited, and display a notice stating that discarded material shall not be left outside of the recycling container or machine; 2. The facility shall be clearly marked to identify the name and telephone number of the operator and the hours of operation; and 3. Additional informational or directional signs may be approved by the Director if found necessary to facilitate traffic circulation, or if the facility is not visible from a public right-of-way.
- Small collection facility maximum size500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
A small collection facility shall not occupy more than 500 square feet or three parking spaces, not, including space that would be periodically needed for the removal of materials or exchange of containers.
- Small collection facility residential setbackSetbackThe distance a building must be held back from a lot line.50 ft
Not be located within 50 feet of any parcel zoned or occupied for residential use.
- Small collection facility right-of-way setbackSetbackThe distance a building must be held back from a lot line.10 ft
Be set back at least ten feet from any public right-of-way, and not obstruct pedestrian or vehicular circulation.
- Small collection facility sign area12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Identification signs are allowed with a maximum area of 15 percent for each side of the structure or 12 square feet, whichever is greater.
From the ordinance
This section establishes standards and procedures for the siting and operation of various types and sizes of commercial recycling facilities, where allowed by Chapters 17.16 through 17.32.