Dimensional standards
Height & bulk
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Maximum increase in FARFloor area ratio (FAR)Total floor area divided by lot area — an FAR of 2.0 permits 20,000 sq ft of floor on a 10,000 sq ft lot. via adjustment25 pct
Building height, lot coverage, and FAR limitations, with an increase up to 25%
- Maximum increase in building heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. via adjustment25 pct
Building height, lot coverage, and FAR limitations, with an increase up to 25%
- Maximum increase in lot coverageLot coverageThe share of a lot that buildings may cover, as a percentage. via adjustment25 pct
Building height, lot coverage, and FAR limitations, with an increase up to 25%
- Maximum reduction in setbacksSetbackThe distance a building must be held back from a lot line. via adjustment25 pct
Setbacks, with a reduction up to 25%, so long as the resulting setback is sufficient for fire safety
- Maximum increase in wall/fence/screening heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. via adjustment25 pct
Wall, fence, and screening height limitations, with an increase up to 25%
From the ordinance
Building height, lot coverage, and FAR limitations, with an increase up to 25%; Wall, fence, and screening height limitations, with an increase up to 25%; Corner lot width requirements, which may be reduced to the minimum established for an interior lot under the subject zoning designation; Setbacks, with a reduction up to 25%, so long as the resulting setback is sufficient for fire safety