Extracted standards
10 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Design
- Maximum antenna assemblies per light pole1 count
No more than one (1) antenna assembly may be attached to a light pole.
- Maximum antenna extension above light pole5 ft
A cylindrical antenna assembly shall not exceed 5 feet above the existing height of a light pole or 50% larger than the top diameter of the pole, whichever is less.
- Maximum antenna assembly volume3 cubic feet
A flush-mounted antenna assembly may not exceed a total volume of 3 cubic feet.
- Minimum clearance above road surface16 ft
No portion of the antenna or transmission equipment mounted on a pole may be less than 16 feet above any road surface.
Lighting
- Lighting restriction
Lighting, other than required safety lights, is prohibited.
Noise
- Compliance with noise standards
Construction and operation of a wireless telecommunication facility shall meet the noise standards identified in the City of Lancaster's General Plan (Table 3-1) and adhere to the City's Noise Ordinance (Chapter 8.24).
Other
- Anti-climbing devices required
Anti-climbing devices are required.
- Color and material requirements
Wireless communications facilities shall be subdued colors and non-reflective materials, which blend with surrounding materials and colors.
- Screening requirement
All accessory equipment and enclosures shall be located underground or screened from public view as approved in writing by the Director.
Signage
- Prohibition of advertising
Wireless communications facilities shall not bear any signs or advertising devices other than certification, warning, or other required seals or legally required signage.
From the ordinance
Wireless telecommunication facilities shall be designed and maintained as to minimize visual, noise, and other impacts on the surrounding community and shall be planned, designated, located, and erected in accordance with the following...