Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Directional sign location
All such signs shall be located on site.
- Maximum directional sign area12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Directional and/or informational signs shall not exceed 12 square feet in sign area or 24 square feet in total sign area.
- Maximum directional sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.
Wall-mounted directional and/or information signs shall not extend above a line 18 inches below the highest point of a parapet wall or the lowest point of a sloping roof.
- Maximum directional sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.10 ft
Freestanding directional and/or informational signs shall not exceed 10 feet measured from the base of the sign.
- Sign lighting
Directional and/or information signs may be internally or externally lighted but any continuous or sequential flashing operation is prohibited.
From the ordinance
Freestanding or wall-mounted directional and/or information signs may be permitted in the I zones subject to the following restrictions: A. Area Permitted Directional and/or informational signs shall not exceed 12 square feet in sign area or 24 square feet in total sign area. B. Height Permitted 1. Wall-mounted directional and/or information signs shall not extend above a line 18 inches below the highest point of a parapet wall or the lowest point of a sloping roof. 2. Freestanding directional and/or informational signs shall not exceed 10 feet measured from the base of the sign. C. Location of Signs All such signs shall be located on site. D. Lighting Directional and/or information signs may be internally or externally lighted but any continuous or sequential flashing operation is prohibited.