York County Unincorporated, Virginia · General provision
Sec. 24.1-220
Dimensional standards
Servicing
- Geographic extent
- Corner lots
Extracted standards
2 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Maximum corner lot widthLot widthHow wide a lot must be, usually measured at the front setback line.150 ft
the maximum width required as a result of application of this provision shall be one hundred fifty feet (150')
- Corner lot street setbackSetbackThe distance a building must be held back from a lot line.30 ft
a minimum building setback of thirty feet (30') from a public street right-of-way shall be maintained
From the ordinance
In the case of corner lots, all yards abutting a street shall be considered front yards and a minimum building setback of thirty feet (30') from a public street right-of-way shall be maintained unless a larger setback is otherwise required. The minimum width requirement for each frontage of any corner lot hereafter created shall be equal to the normally required lot width plus the difference between the required front and side yard dimensions for the district in which located provided, however, that the maximum width required as a result of application of this provision shall be one hundred fifty feet (150').