Dimensional standards
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Lighting
- Blinking or flashing lights prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
Blinking or flashing lights shall be prohibited unless the lights are required as a safety feature.
- Full cutoff fixtures required
All lighting fixtures shall be full cutoff fixtures.
- Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. of lighting fixtures within 50 feet of residential use15 ft
All light fixtures located within 50 feet of any residential use or residential property boundary shall not exceed 15 feet in height.
- Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. of lighting fixtures in non-vehicular pedestrian areas15 ft
The maximum height for lighting fixtures shall be a maximum of 15 feet in height within non-vehicular pedestrian areas.
- Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. of lighting fixtures in vehicular use areas30 ft
The maximum height for lighting fixtures shall be a maximum of 30 feet within vehicular use areas.
- Maximum luminance at property boundary0.5 fc
Maximum luminance levels shall not exceed 0.5-foot candles at the property boundary.
From the ordinance
The purpose of these standards is to assure that exterior lights shall be shielded so that they do not cast direct light beyond the property line in accordance with these standards.