Section 4-16-3 to 4-16-7

Other

• Minimum clearance of awning sign above sidewalk8 ft

  A minimum of eight (8) feet above sidewalk level should be maintained for pedestrian clearance.

• Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. of letters on awning signs10 in

  Letters shall not exceed ten (10) inches in height.

• Minimum setbackSetbackThe distance a building must be held back from a lot line. of free-standing signs from public right-of-way10 ft

  Free-standing signs shall be located no closer than ten (10) feet to a public right-of-way.

• Maximum projection of individual letters or symbols from building surface18 in

  Letters or symbols shall not project more than eighteen (18) inches from the building surface.

• Minimum clearance of marquee sign above sidewalk10 ft

  A minimum clearance of ten (10) feet above the sidewalk level must be allowed for pedestrian clearance.

• Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. of letters on marquee signs12 in

  Letters or symbols shall not exceed twelve (12) inches in height.

• Maximum area of multiple sign for building name16 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  The maximum sign area permitted is sixteen (16) square feet for the sign bearing the name of the building or office park

• Maximum area of multiple sign per business name2 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  two (2) square feet for the name of each business or office located there

• Maximum area of neon window sign as percentage of window area20 pct

  Neon window signs shall not have an area exceeding twenty percent (20%) of the total window area.

• Minimum clearance of projecting sign over driveway15 ft

  If projecting over a driveway, the clearance must be at least fifteen (15) feet.

• Minimum clearance of projecting sign over pedestrian way8 ft

  Projecting signs shall have a minimum clearance of eight (8) feet above grade when located adjacent to or projecting over a pedestrian way.

• Maximum area of each face of projecting sign10 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  If flat, each face shall not exceed ten (10) square feet.

• Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. of sign within site triangle3 ft

  No sign shall be erected within the area encompassed by a site triangle as provided by Section 4-3-5 unless such sign is less than three (3) feet in height; or, the width of the face of any supporting structure is less than 1 foot and the supported sign is elevated six (6) feet above grade.

• Minimum interval between changes of time-temperature sign6 sec

  Such signs shall not change the time-temperature or message more often than once every six (6) seconds.

• Maximum size of time-temperature/changeable message sign (existing only)12 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  Such signs, which shall not exceed (12) square feet in size, shall be calculated as

• Minimum spacing between time-temperature signs along same roadway1 mile

  No more than one such sign shall be located within one linear mile of another like sign along the same roadway.

• Maximum aggregate sign area per linear foot of building face1.5 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000. per ft

  Such signs shall have an aggregate area not exceeding 1.5 square feet for each linear foot of building face parallel to a street lot line.

• Maximum projection of wall sign from building surface12 in

  No part of a wall sign, including the display surface, shall extend more than twelve (12) inches from the building surface.