Urbanna, Virginia · General provision

Sec. 26-126(i)

Dimensional standards

lot requirementsSTREETMin frontage 25 ftMin depth 2 ft
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Extracted standards

5 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Maximum flag lot accessway length1,200 ft

    The length of such accessways shall be related to proposed lot size but generally shall be limited to no more than 1,200 feet.

  • Maximum number of flag lot accessways4 count

    the number of adjacent and parallel narrow lot sections or accessways shall be limited, generally to no more than four

  • Maximum lot depth to width ratio2 ratio

    a ratio of depth to width of two to one shall be considered a desirable maximum.

  • Minimum flag lot accessway width25 ft

    Width of accessways shall not at any point be less than required minimum street frontage of 25 feet (20 feet for family subdivisions)

  • Minimum flag lot accessway width for further subdivision50 ft

    Where the lot served is sufficiently large to permit further subdivision the minimum width of the accessway shall be 50 feet

From the ordinance

Width of accessways shall not at any point be less than required minimum street frontage of 25 feet (20 feet for family subdivisions)...
Sec. 26-126(i)