Stafford County Unincorporated, Virginia · General provision
Sec. 28-248
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Bearing accuracy10 seconds
all bearings in degrees, minutes and seconds to the nearest ten (10) seconds, minimum accuracy.
- Horizontal dimension accuracy0.1 ft
All horizontal dimensions shown on the site development plan shall be in feet and decimals of a foot to be closest to one-tenth of a foot
- Major site plan scale50 ft/inch
Major site development plans shall be prepared to the scale of no less than one inch equals fifty (50) feet or larger.
- Maximum plan sheet size42 inches
No sheet size shall exceed forty-two (42) inches.
- Traffic impact analysis required
Traffic impact analysis as outlined in 24 VAC 30-155 shall be submitted when any major site development plan generates vehicle trips per day that meet the VDOT requirements for TIAs under 24 VAC 30-155, as certified by a civil engineer.
From the ordinance
Major site development plans shall be prepared to the scale of no less than one inch equals fifty (50) feet or larger.