Sec. 120.1-224 through 120.1-230, 120.1-235 through 120.1-239
Extracted standards
20 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Corner lot front determination
Front is side with major access or main entrance; for business/industrial, not primary residential street; sign area allowed for front and half side street frontage under conditions.
- Damaged sign repair period30 days
Such a sign or sign structure may be restored to its original condition within 30 days of the order to remove the hazard.
- Maximum construction sign area100 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
One sign, not exceeding 100 square feet in area, giving the names of the contractors, engineers and architects.
- Maximum construction sign area per contractor12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
One sign per contractor, not more than 12 square feet in area.
- Maximum directional sign area3 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Signs displayed for the direction or convenience of the public... do not exceed a total surface area of three square feet per sign on any lot or parcel.
- Maximum identification sign area6 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Identification signs, not to exceed six square feet in surface area, bearing only addresses or names of occupants of the premises and located on privately owned property.
- Maximum no trespassing sign area2 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
No trespassing, No dumping, No parking, Towing and other similar signs not exceeding two square feet.
- Maximum sign projection over sidewalk18 in
Signs which project more than 18 inches over any publicly maintained sidewalk.
- Maximum temporary sign area32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Each sign is to be 32 square feet or less in area.
- Maximum temporary sign display days14 days
Such sign is displayed no more than 14 consecutive days.
- Maximum temporary sign frequency per year5 times
No person may display temporary signs more than five times per calendar year.
- Maximum yardYardThe open space left between a building and its lot line — the space a setback creates. sale sign display days3 days
The maximum time limit for the display of such signs is three consecutive days.
- NonconformingNonconformingLawful when built, but not compliant with the rules now in force; usually allowed to continue but not to expand. sign repair damage threshold50 pct
A nonconformity sign may be repaired, provided that it had not been damaged in excess of 50 percent of its replacement value.
Portable signs, billboards, signs with flashing lights, signs obstructing egress, signs in right-of-way causing interference, signs causing glare, signs violating federal/state law, signs projecting more than 18 inches over sidewalk, nonconforming signs for closed businesses.
- Radford University flag maximum per organization1 flags
A maximum of one flag per organization is permitted.
- Radford University flag maximum size15 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Flags shall not exceed three-foot by five-foot in size.
- Sign area calculation method
Attached sign area is the continuous perimeter enclosing extreme limits; freestanding sign area is total visible surfaces excluding poles, only one face counted if viewed one at a time.
- Sign permit completion period60 days
A sign permit shall become null and void if the work for which the permit was issued has not been completed within a period of 60 days.
- Sign permit required
No sign that was not in existence and in place on the date of amendment of this chapter shall hereafter be displayed... until a sign permit for the same has been obtained.
- Unused conforming sign removal period365 days
All conforming signs not used by new tenant/owner shall be removed within one year of premises being vacated; if reoccupied, new tenant has three months.
From the ordinance
General sign provisions including exclusions, prohibited signs, permits, temporary signs, nonconforming signs, damaged signs, permitted signs generally, sign area calculation, corner lots, removal of unused signs, permit approval, and Radford University signs.