Dimensional standards
Lot
- Minimum lot depth
- 2.5 ft
Extracted standards
8 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Additional buffer for double frontageFrontageThe length of a lot line that touches a public street. lots10 ft
an additional ten-foot buffer strip will be provided along the main street or highway without the right of access across such buffer strip.
- FrontageFrontageThe length of a lot line that touches a public street. on approved street or private roadway
Every lot shall front on an approved street or private roadway.
- Maximum block length1,200 ft
Length of blocks shall not exceed 1,200 feet in length.
- Maximum dead-end street length1,200 ft
Dead-end streets are to be no more than 1,200 feet long.
- Maximum lot depth to width ratio2.5 ratio
Except for townhouse developments, lot depths shall not exceed two and one-half times the width of the lot.
- Maximum street grade5 pct
nor more than five percent unless a modification is approved by the town.
- Minimum street grade0.5 pct
Grades shall not be less than one-half of one percent.
- Minimum turnaround radius at property line50 ft
All dead-end streets shall be provided with a turn-around at the end, having a radius at the property line of at least 50 feet.
From the ordinance
Dead-end streets are to be no more than 1,200 feet long... turn-around... radius at the property line of at least 50 feet... Length of blocks shall not exceed 1,200 feet... lot depths shall not exceed two and one-half times the width of the lot.