Section 2.11
Extracted standards
12 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Conceptual plan contour interval5 feet
Existing topography with a maximum contour interval of five feet...
- Conceptual development plan copies14 copies
The submission shall consist of 14 copies and shall contain the information listed below.
- Conceptual plan scale100 feet per inch
A plan, at a scale of not less than one inch equals 100 feet...
- Conceptual plan sheet size24 inches
All maps or plans submitted as part of a conceptual development plan shall be presented on a sheet having a maximum size of 24 inches by 36 inches.
- Final plan contour interval2 feet
Existing topography and a statement indicating whether it is air survey or field run, with a maximum contour interval of two feet...
- Final development plan copies14 copies
Fourteen copies of a final development plan prepared in accordance with the approved conceptual development plan shall be filed with the zoning administrator...
- Final plan scale100 feet per inch
A final plan, at a scale of not less than one inch equals 100 feet...
- Final plan sheet size24 inches
All maps, plans, sketches and illustrations submitted as part of a final development plan shall be presented on a sheet having a maximum size of 24 inches by 36 inches.
- General regulations apply
Other than those regulations specifically set forth in Article 2: District regulations for a particular district, the open space, off-street parking, loading, sign and all other similar regulations set forth in this ordinance shall have general application in all planned districts.
- Peripheral bulk regulations
At all peripheral lot lines the bulk regulations and landscaping and screening provisions shall generally conform to the provisions of Article 5: Landscaping, buffering, screening, fences, and open space regulations.
- Recreational amenities and paths
Within planned developments, particular emphasis shall be placed on the provision of recreational amenities and a comprehensive system of pedestrian, bicycle and/or bridle paths which shall be carefully coordinated with the provision of open spaces, public facilities, vehicular access routes and planned transportation facilities.
- Street and driveway design
Street and driveways shall be designed to generally conform to the provisions set forth in this ordinance and all other town ordinances, the facilities standards manual and other regulations controlling same...
From the ordinance
The planned development shall be located in an area in which transportation, police and fire protection, other public facilities and public utilities, including sewerage, are or will be available and adequate for the uses proposed...